Major work on a workhorse. . .

Master Nyte · 08-27-2008, 03:44 PM

I have an EZ GO whose frame has rusted through (I posted this before) we found an EZGO workhorse gas frame. We are wanting to swap the electric motor into the gas frame. . . the rear axels are different. The gas cart has regular springs, but the electric operates off of leaf springs. We are unable to swap axels out, so is there any way to make this conversion?

We are not in any way welders, nor do we have access to those kinds of things. We are trying to find the cheapest way to make a cart run (semi)safely. . .

08-27-2008, 03:44 PM	#1
Master Nyte Not Yet Wild Join Date: Aug 2008 Posts: 15	Major work on a workhorse. . . I have an EZ GO whose frame has rusted through (I posted this before) we found an EZGO workhorse gas frame. We are wanting to swap the electric motor into the gas frame. . . the rear axels are different. The gas cart has regular springs, but the electric operates off of leaf springs. We are unable to swap axels out, so is there any way to make this conversion? We are not in any way welders, nor do we have access to those kinds of things. We are trying to find the cheapest way to make a cart run (semi)safely. . .
Master Nyte Not Yet Wild Join Date: Aug 2008 Posts: 15

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Forum
Major Changes	Extreme DC!
Workhorse Fuel Gauge Does Not Work	Gas EZGO
Need Major Help!!!!!!	Electric EZGO
1995 workhorse was running great now I have to work the choke.	Gas EZGO