|
09-14-2013, 04:47 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2011
Posts: 24
|
Cover for exposed pedal linkage
I have an EZGO TXT lifted electric cart.
Like most other ezgo carts (I think) the gas and brake pedal linkage is exposed under the floor of the cart, and is exposed to being caught or bumped while off roading. Today I ran over some hidden wire, and it caught my gas pedal making it go full throttle until I turned the cart off. Does anyone know of a skid plate or cover for this, or ever make one? This is not my cart, but I used this pic to illistrate the linkage I am talking about:  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-15-2013, 10:19 AM
|
#2 |
|
Gone Wild
 Join Date: Oct 2011
Location: Cowtown Texas
Posts: 180
|
Re: Cover for exposed pedal linkage
I have had same problem going thru thick brush/vines before. Interested in this as well.
|
|
|
|
|
09-16-2013, 04:08 PM
|
#3 |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Cover for exposed pedal linkage
I've never seen a "store bought" cover, but would be easily made with some heavy sheet metal bent to the shape you need/want, then attached using either sheet metal screws or drill and tap holes onto the frame to hold it on.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Driven clutch dust cover very close to engine air cover | Gas EZGO | |||
| Diagram of the gas pedal / throttle linkage assembly? | Gas Club Car | |||
| Pistons and Rings Exposed | Gas EZGO | |||
| Microswitch innards exposed and explained | Electric EZGO | |||
| NAVITAS TSE1000 Controller -Exposed | Extreme DC! | |||
Linear Mode
