|
10-25-2020, 04:29 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2012
Posts: 245
|
TC Charger error message on Zeva
I am finally getting close to completing my lithium conversion. Bench testing is going okay, until hooking up the charger. I got an error message that said Input voltage error. Also, it said the output voltage was 75v. My cart is a 72V cart with 10 Leaf Modules running 82v. I would appreciate any help on clearing this up. It is controlled by CAN so it should be pretty straight forward, I would have thought.
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Charger Error 1 AND Error 2 | Electric Yamaha | |||
| ZEVA error code "No comms to charger” | Lithium EZGO | |||
| TC Charger ZEVA input voltage error | Extreme DC! | |||
| High-Speed Walk-away error message on IQ Cart | Electric Club Car | |||
| Error message | Gas Yamaha | |||
Threaded Mode