What did you do to/for your EZGO today?

AndrewR69 · 11-11-2020, 12:47 PM

I pulled it out of the garage to check the Toe-in. Just had new wheels tires put on and it felt a little squirrely. Toe-in measured 1.125". Somethings not right?!

Cobra,1 · 11-12-2020, 08:47 PM

Way too much toe out.
Start with 1/8” toe “in” meaning front tire distance measured at front of tires will be 1/8” less then measurement between tires when measured at rear of tires.

Toe out = equals more responsive “twitchy” steering response.
More toe in dampens steering response.

Before adjusting toe, square cart meaning align right front tire so it is pointing
In the same direction as right rear tire. Straight edge or using a string.
Lock steering wheel so it can’t move.
Next adjust left front wheel so distance between left and right tire are equal when measured at front and rear of front tires compared to each other.

Adjust tie rods on each side 1/16 toe in and you should have total 1/8” toe in along with equal steering input on left and right turns.

Most important is to square cart ( thrust alignment) before making front end alignment changes.😊

Sterns · 11-14-2020, 07:01 PM

I applied Cerakote to all the plastic, looks like new

Before & After pics attached

Doubles Shooter · 11-15-2020, 08:08 AM

Quote:

Originally Posted by Sterns

I applied Cerakote to all the plastic, looks like new

Before & After pics attached

Curious about the Cerakote. Isn't that a bake on finish used on guns or a different product?

2K6TBSS · 11-18-2020, 06:03 PM

Installed my on-board charger, moved my 12v accessory wiring onto a steel plate above the charger, new brakes (and cables), new wheels and tires.

WIN_20201118_14_42_53_Pro.jpg

IMG_2414.jpg

IMG_2415.jpg

IMG_2417.jpg

IMG_2418.jpg

Coreyw4023 · 11-19-2020, 09:46 AM

Added some new upgraded shocks and added LED headlights to my RXV

Doubles Shooter · 11-20-2020, 06:45 PM

Quote:

Originally Posted by Doubles Shooter

Haven't mounted them yet, but FedEx brought my new mud snow tires. 20x10x8. They should do better in the river bottom mud. Posi has to wait till next year. Doing a total floor to ceiling bathroom remodel. Killed the bank account.
Attachment 209456

What a difference on the mud. Still had some tire spinning but kept forward motion in a couple really messed up roads where I've had trouble before1120201634.jpg.

EZGOMAX · 11-20-2020, 08:39 PM

Had the controller reprogrammed to “Freedom” and moved from 14 mph to 22. I also added a rail type enclosure. For winter comfort. My wife thinks i’ve Lost my mind! I think I still have funds to spare from selling my boat.

EzIndyGo · 11-23-2020, 02:36 PM

Ordered Rhox dual-action rear leaf springs. My stockers are pretty well shot.

atcrick · 12-03-2020, 08:27 AM

I added music tones to my back up buzzer

11-11-2020, 12:47 PM	#10151
AndrewR69 Not Yet Wild Join Date: Oct 2020 Posts: 2	Re: What did you do to/for your EZGO today? I pulled it out of the garage to check the Toe-in. Just had new wheels tires put on and it felt a little squirrely. Toe-in measured 1.125". Somethings not right?!
AndrewR69 Not Yet Wild Join Date: Oct 2020 Posts: 2

11-12-2020, 08:47 PM	#10152
Cobra,1 Gone Wild Join Date: Sep 2018 Location: Md. Posts: 1,059	Re: What did you do to/for your EZGO today? Way too much toe out. Start with 1/8” toe “in” meaning front tire distance measured at front of tires will be 1/8” less then measurement between tires when measured at rear of tires. Toe out = equals more responsive “twitchy” steering response. More toe in dampens steering response. Before adjusting toe, square cart meaning align right front tire so it is pointing In the same direction as right rear tire. Straight edge or using a string. Lock steering wheel so it can’t move. Next adjust left front wheel so distance between left and right tire are equal when measured at front and rear of front tires compared to each other. Adjust tie rods on each side 1/16 toe in and you should have total 1/8” toe in along with equal steering input on left and right turns. Most important is to square cart ( thrust alignment) before making front end alignment changes.😊

11-18-2020, 06:03 PM	#10155
2K6TBSS Getting Wild Join Date: Jul 2019 Location: Discovery Bay, CA Posts: 123	Re: What did you do to/for your EZGO today? Installed my on-board charger, moved my 12v accessory wiring onto a steel plate above the charger, new brakes (and cables), new wheels and tires. WIN_20201118_14_42_53_Pro.jpg IMG_2414.jpg IMG_2415.jpg IMG_2417.jpg IMG_2418.jpg

11-19-2020, 09:46 AM	#10156
Coreyw4023 Not Yet Wild Join Date: Nov 2020 Posts: 3	Re: What did you do to/for your EZGO today? Added some new upgraded shocks and added LED headlights to my RXV
Coreyw4023 Not Yet Wild Join Date: Nov 2020 Posts: 3

11-20-2020, 08:39 PM	#10158
EZGOMAX Not Yet Wild Join Date: Oct 2020 Location: Texas Posts: 10	Re: What did you do to/for your EZGO today? Had the controller reprogrammed to “Freedom” and moved from 14 mph to 22. I also added a rail type enclosure. For winter comfort. My wife thinks i’ve Lost my mind! I think I still have funds to spare from selling my boat.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-23-2020, 02:36 PM	#10159
EzIndyGo Getting Wild Join Date: Apr 2020 Posts: 95	Re: What did you do to/for your EZGO today? Ordered Rhox dual-action rear leaf springs. My stockers are pretty well shot.
EzIndyGo Getting Wild Join Date: Apr 2020 Posts: 95

12-03-2020, 08:27 AM	#10160
atcrick Not Yet Wild Join Date: Nov 2020 Location: Surprise az Posts: 27	Re: What did you do to/for your EZGO today? I added music tones to my back up buzzer

Similar Threads
Thread	Forum
got another cart today	Gas EZGO
New toy came today!!!	Big Block Talk!
I took apart my front end today.	Lifted Golf Carts