|
04-05-2009, 05:38 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Posts: 13
|
tuning potentiometer??
Hi guys, I just changed my '93 36v club car from resistor to solid state. Installed a raptor motor, heavy duty solenoid, 4awg cables, g.e 500 amp controller, potentiometer (I've been told it was for an eazy go?) got 'em from cart zone. My dilemma is: when I hit the pedal slightly, enough to hear the micro swith (potentiometer's) kick in & the solenoid, it starts to do a jerking move, like it wants to haul but, so when you start off it does this, almost think your gonna pop a wheely, once its taken off it runs fine & fast. Is there an adjustment I'm suppose or can do? do I have a cable reverse?, it's obviously not normal at low speed to be jerking. You can also see the motor like it wants to come of the rear end. Please help.
Thanks. AL |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
potentiometer | Electric EZGO | |||
Motor tuning! | Extreme DC! | |||
Need help tuning a carb | Gas Club Car | |||
fine tuning the Club car governor | Gas Club Car | |||
Clutch tuning | Big Block Talk! |