|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
10-30-2018, 02:50 PM
|
#1 |
|
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Yamaha G3-E Is original throttle wiper board 0-5k or 5k-0?
Just curious to know how Yamaha originally configured their throttle wiper board; as to whether it was 5k-0 or 0-5k? Reason for the question is that the person who had the cart before me had installed a Curtis PMC 1204-410; which I believe is a 5k-0. Thus made me wonder is the original wiper board was the sam 5k-0 or not. I was planning to install a PB-6 shortly, but I understand that they are only 0-5k; therefore made me think that even attempting to try the cart with the controller in their now might not work?
  |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| cleaning contacts on wiper board | Electric EZGO | |||
| 2013 RXV Curtis: Throttle wiper fault | Electric EZGO | |||
| 1988 Marathon Electric - Arcing Wiper Board - Tried Everything, Need Ideas | Electric EZGO | |||
| Wiper board sparkes and smokes | Electric EZGO | |||
| Resistor wiper contact board | Electric EZGO | |||
Threaded Mode