01-12-2023, 01:20 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 28
|
Need an EZGO TXT Series expert for 36 to 48 conversion
So the short story is I have a 2000 EZGO TXT series cart. I have a upgrade motor, Alltrax SR controller and heavy duty solenoid.
The cart was running great. My batteries were old so I decided to make the switch to 48 volt. I pulled out my 36 volt batteries and installed a new 48 volt Eco Battery 105ah lithium. I changed the resister on my 400 amp solenoid to a 48 volt compatible resistor. Here is my issue.....my resistor is getting extremely hot and I am getting no clicking from the solenoid and no power to my Alltrax controller. Really odd since I have the same wiring set up. I lugged my laptop into the Alltrax and I get 4 blinking green lights. I get 51 volts on one side of the solonoid and 51 volts on all 3 big cables to the Alltrax. Any EZGO doctors on here that could provide some advice? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2023, 01:27 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: Need an EZGO TXT Series expert for 36 to 48 conversion
Did you change the solenoid to a 48? And look at the voltage settings in the Alltrax software and make sure that it is set for 48 volts.
|
01-12-2023, 03:02 PM | #3 | |
Gone Wild
Join Date: Apr 2008
Location: Western NY
Posts: 2,296
|
Re: Need an EZGO TXT Series expert for 36 to 48 conversion
Quote:
EDIT jumped the gun and didnt see the response above.. I have 2 different orange 400 amp solenoids, a 36v version and a 48v version and they do have different coils in them. |
|
01-12-2023, 03:47 PM | #4 |
Not Yet Wild
Join Date: Sep 2019
Posts: 28
|
Re: Need an EZGO TXT Series expert for 36 to 48 conversion
Thanks for the responses. I have the MZJ400A solenoid that can do both 36 volt or 48 volt. I changed the resistor to a 48 volt resistor. I also changed the voltage settings in the Alltrax. With the new Eco Battery system it comes with its own charging port so you have to remove the old one.
I know the old charging port had a reed switch in it and I thought some part of it went to the solenoid but I could be wrong. I don't have the schematics right now. The new charger just has black and white straight to the battery. |
01-12-2023, 06:31 PM | #5 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: Need an EZGO TXT Series expert for 36 to 48 conversion
If you need an ezgo expert you probably should post this in the ezgo section, instead of the club car lithium section. You’ll probably get a lot more response there. Not much traffic here compared to the electric ezgo section
|
01-12-2023, 07:21 PM | #6 |
Not Yet Wild
Join Date: Sep 2019
Posts: 28
|
Re: Need an EZGO TXT Series expert for 36 to 48 conversion
Yeah I realized that earlier today and posted it there. Thanks
|
Tags |
switched to lithium |
|
|
Similar Threads | ||||
Thread | Forum | |||
EzGo TXT Series 36x 48v conversion? | Electric EZGO | |||
Ezgo SERIES to TXT48 conversion kits | Announcements | |||
Ezgo series to TXT48 IQ conversion kit | Electric EZGO | |||
EZGO Series to PDS Conversion | Electric EZGO | |||
2008 EZGO PDS to Series Conversion | Electric EZGO |