05-13-2007, 09:10 PM | #1 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
NO NO's EZGO ISSUES
Let's try this again........
I need to know how to speed up a 1995 E-Z-GO gasser. I can handle the governor adjustment, but is there anothe way to go about a speed enhancement for "cough" free? I almost talked the guy into an 18hp Vanguard from Cart Parts Plus with HS gears, but he didn't want to spend that kind of cash. He doesn't want to spend any cash, except on a torque spring for the driven clutch. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-13-2007, 09:20 PM | #2 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
those engines are expensive if i had time id throw in a motorcyle engine u can get motorcycles that were laid over real cheap
|
05-13-2007, 09:21 PM | #3 |
Not Yet Wild
Join Date: Feb 2007
Location: Washington, PA
Posts: 66
|
I have the weirdest feeling of Deja Vu......
|
05-13-2007, 09:23 PM | #4 | |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Quote:
|
|
05-14-2007, 02:25 PM | #5 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Nono my project cart is a 95 ezgo and I sped it up with a snowmobile engine. It will go about 50 mph with stock tires. Id say this is a good way to get the most bang for your buck.
|
05-14-2007, 06:35 PM | #6 | |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: NO NO's EZGO ISSUES
Quote:
*edit* 3 post now, how many do you need to post pics? |
|
05-14-2007, 07:01 PM | #7 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Just go in Test Post and run it up to about 5 or 10.
|
05-14-2007, 10:18 PM | #8 | ||
Gone Wild
Join Date: Feb 2007
Posts: 176
|
Re: NO NO's EZGO ISSUES
Quote:
If he doesn't car about his engine life at all, you can do a few bad things that will get him a couple more mphs. Drill a hole directly infront of the carb. Drill the main jet to a #104, and when the engine is HOT... set the valve lash as close to perfect as you can... that is touching the valve, but not pushing it. 1 year tops... then he'll need the Honda/briggs Bob |
||
05-17-2007, 06:24 PM | #9 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
I have a question.......another one.
Do the EH series twin cylinder RobinSubaru engines fire each cylinder at the same time, making it like a single cylinder, or like 1-2-1-2-1-2....? It would make more sense at 1-2-1 because it gets power on each revoultion, but does it? :) |
05-17-2007, 07:34 PM | #10 | |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Quote:
|
|