|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-08-2020, 08:46 PM | #1 |
Not Yet Wild
Join Date: Apr 2020
Location: NE WI
Posts: 1
|
G2 Low oil light removal
I’m in the process of painting my G2, have all body panel off but can’t figure out how to remove the low oil warning light from the front cowl. The front side has the lens and the rear side has a hex shaped metal housing about 1 1/4” long(like a wide nut). I was able to remove the rubber grommet that holds the bulb holder and the wires come out if it. The housing & lens spin but don’t seem to unthread from one another. I’d like to save it to reuse it. Does anyone know how to remove it?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2020, 05:59 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 Low oil light removal
Masking tape...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Factory Battery light removal | Electric Club Car | |||
Light bar removal? - EZGO TXT | Electric EZGO | |||
'05 G27A light utility - sheave removal | Gas Yamaha | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Electric EZGO | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Gas EZGO |