|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-04-2012, 02:09 PM | #1 |
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
G1 help
I messed up the threads in the end of the crank for the clutch retaining bolt.
Anyone know the size tap I need to clean them up? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2012, 06:21 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G1 help
Check the size of the retaining bolt.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
06-05-2012, 08:57 AM | #3 |
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
Re: G1 help
Don't have one on hand, I do have one coming from a used parts dealer, but want to get the tap ordered also to reduce wait time.
|
06-05-2012, 06:50 PM | #4 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: G1 help
if your clutch had a bolt holdin it on , that's it !
|
06-06-2012, 04:11 PM | #5 |
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
Never mind. I'll figure it out.
|
06-09-2012, 09:55 PM | #6 |
Gone Wild
Join Date: Sep 2010
Location: Courtland, MN
Posts: 313
|
Re: G1 help
For those that want or need to know, the threads on the clutch retaining bolt are 13mm x 1.25 or 1/2"-20
|