|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-23-2012, 08:55 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2012
Location: so. ill.
Posts: 25
|
G1 governor bypass and accelerator spring
Just bought g1 with governor bypassed. Throttle cable goes directly to carb. Problem is when you let off gas pedal throttle stays open or moves back slowly. Im thinking its 1me of 2 things. Either my throttle cable is going bad.....or I need a return spring on the carb to pull closed when I let off accelerator. Anybody have any suggestions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-23-2012, 09:38 AM
|
#2 |
|
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: G1 governor bypass and accelerator spring
spring on the carb !
|
|
|
|
|
06-24-2012, 07:56 AM
|
#3 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: G1 governor bypass and accelerator spring
Most will leave all the stock throttle linkage hooked up and just drill the governor lever out on the transaxle so it doesn't grab. Do a search there are some good photos here about how to do that. If you have your linkage that's the way to go.
|
|
|
|
|
| Tags |
| accelerator spring, g-1, governor, throttle cable |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 Governor bypass | Gas Yamaha | |||
| 84 G1 Best way to bypass Governor? | Gas Yamaha | |||
| governor bypass | Gas Yamaha | |||
| governor bypass | Big Block Talk! | |||
| ez-go governor bypass? | Gas EZGO | |||
Linear Mode
