|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-23-2019, 07:24 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
|
Alltrax xct throttle calibration
I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2019, 07:26 PM | #2 |
Not Yet Wild
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
|
Re: Alltrax xct throttle calibration
Looking at it now my throttle is actually working backwards. When it is on the floor it is showing 0% and when barely pressed it shows 100%
|
02-23-2019, 07:30 PM | #3 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,227
|
Re: Alltrax xct throttle calibration
What throttle do you have selected in the software. It should be MCOR 5k-0 ohms.
|
02-23-2019, 07:32 PM | #4 | |
Getting Wild
Join Date: May 2018
Location: MB SC
Posts: 112
|
Re: Alltrax xct throttle calibration
Quote:
http://www.buggiesgonewild.com/elect...al-issues.html |
|
02-23-2019, 07:45 PM | #5 | |
Not Yet Wild
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
|
Re: Alltrax xct throttle calibration
Quote:
Time to see what speeds i can get |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Calibration for Curtis Controller 2013 Precedent | Electric Club Car | |||
calibration/test module adaptor | Electric Club Car | |||
Clutch calibration | Big Block Talk! | |||
SOC Calibration | Electric EZGO | |||
Alltrax Throttle | Electric Yamaha |