|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-17-2019, 10:05 PM | #1 |
Not Yet Wild
Join Date: Apr 2019
Posts: 7
|
First time owner and in need of help
Just picked up this 2013 club car precedent at auction. It was used at the golf course on the military base for the past few years. After purchase, I noticed the steering wheel didn’t align with the wheels. The. I noticed that the passenger side wheel canted out while the driver side was straight. I looked up fixes and came a cross the sticky post in this board.
I attempted to make the adjustments but it didn’t seem to work. The wheel is still canted and the wheel still isn’t centered. Looking at the pics below, can you all let me know what needs fixed/replaced. Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-18-2019, 12:01 AM | #2 |
Runs with scissors-
Join Date: Dec 2010
Location: Da UP
Posts: 1,962
|
Re: First time owner and in need of help
Welcome !
Someone here has the answer you need - |
04-18-2019, 07:22 AM | #3 |
Gone Wild
Join Date: Nov 2018
Location: Lady Lake, FL.
Posts: 457
|
Re: First time owner and in need of help
Call David Hicks at Revolution Carts, a site sponsor, he has everything you need! I was rebuilding my wife's precedent and I ended up getting pretty much an entire front end instead of bushing kits at a pretty steep discount. He has front end parts that he has removed from brand new carts to install lift kits and will sell you the new/used take-off parts.
Drives like a new cart now. Sent from my SM-G960U using Tapatalk |
04-18-2019, 10:40 AM | #4 | |
Not Yet Wild
Join Date: Apr 2019
Posts: 7
|
Re: First time owner and in need of help
Quote:
But I don’t know what parts I need. What do you think? Sent from my iPhone using Tapatalk |
|
04-18-2019, 10:50 AM | #5 |
Gone Wild
Join Date: May 2018
Location: Retired and live in small town of Timberlake, North Carolina
Posts: 662
|
Re: First time owner and in need of help
Welcome to the forum!
|
04-18-2019, 01:05 PM | #6 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: First time owner and in need of help
Welcome to BGW!!!
Looks like a bent spindle could be the culprit. Has it been wrecked hit anything solid? |
04-18-2019, 02:57 PM | #7 | |
Not Yet Wild
Join Date: Apr 2019
Posts: 7
|
Re: First time owner and in need of help
Quote:
I’m sure it’s been through hell. Military personnel run them pretty hard. Should I go ahead and replace the spindles, tie rod ends and the steering rack? I tried adjusting the toe in and it didn’t do anything. Sent from my iPhone using Tapatalk |
|
04-18-2019, 03:10 PM | #8 |
Not Yet Wild
Join Date: Apr 2019
Posts: 7
|
Re: First time owner and in need of help
Also I’m going to put a double A arm lift on it. So should I just wait and see if the lift kit fixes it?
Sent from my iPhone using Tapatalk |
04-18-2019, 03:30 PM | #9 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: First time owner and in need of help
A double a arm kit is a pretty much new front end at least the all sport one is. That should fix everything. It makes the turning Radius much better to boot.
|
04-18-2019, 03:35 PM | #10 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: First time owner and in need of help
Are you planning on wheels and tires also. I am pretty sure you will need a offset wheel for that lift. Brake cable extension or read the sticky how to flip them upside down changing left to right axles.
|