|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-14-2019, 05:36 PM | #1 |
Getting Wild
Join Date: Jun 2019
Posts: 98
|
06 precedent alltrax mount
Total newbie. Hoping I haven't bit off more than I can chew.
I'm looking for the best place to mount the xtc 500 controller. It's going to be hard with the factory heat sink on the other side of the panel. Is that heat sink even needed? Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2019, 09:19 PM | #2 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: 06 precedent alltrax mount
Truthfully you can almost remove the entire center mount plate and mount it how you want. As long as it is in a place that will remain dry and gets air flow, you’re good.
|
07-14-2019, 09:46 PM | #3 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 06 precedent alltrax mount
^ What he said. The heatsink is not necessary with the Alltrax. It will stay plenty cool enough with it's built in cooling fan. Remove the factory heatsink and mount it wherever you want to.
|
07-14-2019, 10:01 PM | #4 |
Getting Wild
Join Date: Jun 2019
Posts: 98
|
Re: 06 precedent alltrax mount
I have it mounted now. I'm now starting to upgrade the cables to 2G. On my Curtis controller I have an S1 and S2. On the instruction diagram it shows replacing a light blue wire with a #4 in the wire kit and the orange stays the same. It seems like huge difference. I'm assuming F1 and F2 interchange with S1 and S2.
Is this right? I almost think I'm missing something. Sent from my SM-G965U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Where did you mount your Alltrax FN1 switch? | Electric EZGO | |||
Horizontal Alltrax / Solenoid Mount | Electric EZGO | |||
Alltrax xct universal adapter mount = higher temps? | Electric Club Car | |||
where to mount reducer on a precedent? | Electric Club Car | |||
Where to mount DC Converter on 07 Precedent? | Electric Club Car |