|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-20-2019, 05:39 PM | #1 |
Not Yet Wild
Join Date: Jul 2019
Posts: 1
|
Upgrading 48v F&R switch but wires are different colors and bars are different
Ok, so I had an issue with my F&R switch getting overloaded and melted. After having a professional look at it, he said I needed to upgrade to a heavy duty F&R switch, and upgraded all the cables. I upgraded all the cables but the switch has different colored wires and I cant figure out which ones go where? the old one had the following wires
Left to right, top to bottom Old micro switch wires white w/black stripe___Orange___________Green Green w/white stripe__Red w/ white stripe__Black (nothing_____________________________White New micro switch wires Blank___________________Black_________Green Blank___________________Blue___________Black _______________________Red___________White Can somebody tell me how to write the new one? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-21-2019, 06:36 AM | #2 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Upgrading 48v F&R switch but wires are different colors and bars are different
Might get quicker response if you tell us what year the cart is, and any modifications it might have. As well as the part #and/or where you got the F&R switch from.
|
Tags |
club car, forward reverse switch |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need corresponding colors for micro switch on new FnR switch | Electric Club Car | |||
Best Way To Conceal Wires Without Running Thru Canopy Support Bars? | Design Center | |||
Question about upgrading to 2 gauge wires | Electric Club Car | |||
Running wires through roof support bars? | Design Center | |||
Upgrading Motor, Controller, Wires,! | Electric Club Car |