|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-12-2016, 03:38 PM | #1 |
Not Yet Wild
Join Date: May 2011
Posts: 34
|
G2 governor arm on transaxle
I have a G2 that I have put a big block in. I am wondering if I need to do anything with the arm on the transaxle? I have removed all cable going to it so it is just there not hooked to anything. Do I need to tie it one way or the other?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-12-2016, 04:09 PM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 governor arm on transaxle
I just removed the governor arm from the rod. No problems yet, but I don't beat it up...
|
11-12-2016, 08:37 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G2 governor arm on transaxle
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-14-2016, 09:41 PM | #4 |
Not Yet Wild
Join Date: May 2011
Posts: 34
|
Re: G2 governor arm on transaxle
Thanks for the replies. I have not removed the arm yet but I did not know how it operated inside so I left it in for now.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
governor bypass or replace governor cable | Gas Yamaha | |||
Transaxle | Electric Club Car | |||
Transaxle Swap/Yamaha Transaxle, Good Deal? | Lifted Golf Carts | |||
Duromax and Transaxle Governor | Clone Engine Swaps |