|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-22-2017, 11:45 PM | #21 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: drive belt misalignment
Then he may be good to go!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-22-2017, 11:47 PM | #22 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: drive belt misalignment
|
03-23-2017, 08:34 AM | #23 |
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: drive belt misalignment
cgtech here are 2 pics of my old primary fixed sheave..needs cleaned up some..do you feel it's serviceable?
|
03-23-2017, 08:41 AM | #24 |
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: drive belt misalignment
Spicy.. I didn't order the new clutch, there is a guy about 30 minutes from me who has a place here in Ohio and a place in Florida down by the Villas close to Tampa. These clutches are all NEW take off, that get replaced with after market clutches for people who want a cart that will run 35 mph plus on the streets. He bought 500 clutches and has them on ebay and craigslist.. I saw a savings and went for it.
|
03-23-2017, 09:42 AM | #25 |
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: drive belt misalignment
Move the engine or transaxle to straighten it out
|
03-23-2017, 09:43 AM | #26 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: drive belt misalignment
We are looking for this part only, from your old clutch. Look for a wear ring at Blue arrow. Clean up rust. Might be ok. Removing the sliding portion is as easy as lifting it off the fixed portion.
|
03-23-2017, 10:10 AM | #27 |
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: drive belt misalignment
cgtech thanks for all your help.. I will get a good picture tonight of the area with the blue arrow.. yeah I have had the 2 clutches apart already..suggestions on cleaning up the rust? How about a light blasting in a cabinet blaster, sand is pretty used up and doesn't seem to rough up the surface. Follow up with polishing in the lathe..
|
03-23-2017, 02:18 PM | #28 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: drive belt misalignment
Wd40 & a green 3M scrubber pad is great. Just be sure to wash all the WD off.
|
03-23-2017, 04:24 PM | #29 |
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: drive belt misalignment
cgtech here is the picture of my old fixed sheave..there is no noticeable wear mark..
And of course the new clutch is seated and will not come off..did I read somewhere that if you put grease in the end of the shaft and run the bolt in that will pop it loose from the tapered seat? |
03-23-2017, 06:55 PM | #30 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: drive belt misalignment
Take the sliding sheave/weight/spider off the new clutch and see if the splines match up with the old fixed sheave, I'm with GC 99% shure they will mate up. Now you need the fixed sheave puller tool!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Drive belt tension/belt burning | Clone Engine Swaps | |||
?? How To: Change the Drive Belt & Starter Belt | Gas EZGO | |||
JW1 Drive Belt & J55 Drive Belt Dimensions? | Gas Yamaha | |||
92 carry all drive belt and starter belt | Gas Club Car | |||
How do I change the drive belt and altenator belt? | Gas Club Car |