High speed accelerator cable for stretched carts?

[NSB Buggy]

I am looking to get a little more torque back in my acceleration. Added high speed gears and the top end is 27-28 MPH, but the low end torque is horrible. Does anyone know of a high speed accelerator cable that works with a stretched cart?
I have a 2019 Club Car President with the Subaru engine. Thnak you in advance.
Also open to any other suggestions for speed and power. Clutch work will be down the line, but will happen.

[kgsc]

I would get in touch with David at Revolutiongolfcars.com

[NSB Buggy]

kgsc
Thank you for the tip. Spoke to David and no one makes the cable, HOWEVER, it is as simple as buying the standard length and swapping out the springs. Plus this way I don't need to disconnect anything at the pedal so its very little labor involved. Will post how well it works out soon.

[NSB Buggy]

Thank you kgsc and David from Revolutioncarts.com. Finally installed the spring and I am now hitting 34 mph easily. I am pretty sure it will do more if I had more than the driveway to test it on. VERY happy. The spring was not a super simple swap as there is no cable slack on that end but it was not too difficult.

[FloridaCart]

Originally Posted by NSB Buggy

Thank you kgsc and David from Revolutioncarts.com. Finally installed the spring and I am now hitting 34 mph easily. I am pretty sure it will do more if I had more than the driveway to test it on. VERY happy. The spring was not a super simple swap as there is no cable slack on that end but it was not too difficult.

NSB, Were you able to just get the spring from David ? or somewhere else ? Thanks.....