01-15-2021, 10:14 AM | #1 |
Gone Wild
Join Date: Sep 2010
Location: Steger Ill.
Posts: 312
|
Is this right????
Here’s what I’m working on
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2021, 10:20 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Is this right????
No. The second groove in the plastic end is supposed to snap into the bracket. It’s a little tricky to get them to pop in sometimes, but once it’s in there it won’t come out.
Whoever did that squeezed the bracket up with pliers. Use a flat head screwdriver to open that gap back up to about 3/16” wide or maybe a hair more. Then snap the second groove down into the bracket. If it’s a loose fit then use pliers to close it up a hair. The rubber dust boot will then fit on the first groove. Check at the transmission end as well and make sure it’s fit on the second groove as well. |
01-18-2021, 01:42 PM | #3 |
Gone Wild
Join Date: Sep 2010
Location: Steger Ill.
Posts: 312
|
Re: Is this right????
Ok I will do thank you so much for the explanation and info.
|
Tags |
governor cable?? |
|
Thread Tools | |
Display Modes | |
|