Project 4x4 cushman utv max

dreadneck · 06-29-2009, 08:36 PM

ok... gonna start this thread and keep you posted on the progress. started off with a cushman that was recovered from a pool. found most the info on stock electronics, how to test the controller, wire diagrams, etc. most info is was found from the manufactures of the parts for the cushman. cushman can send you the manual for your cart if you give them the model and serial number.

(FOR THE CUSHMAN GUY) and i found a motor like mine on ge web page.

dreadneck · 06-29-2009, 08:45 PM

My plan is to set up the front axle like a unimog axle. i have a miser axle from a one man cart that is narrow. this will allow the room needed to add gear drive and knuckle for steering. Just an ideal for now but when i get started i will post some pics.

dreadneck · 07-03-2009, 01:40 PM

the first problem I've came to is the universal to be added to the front axle. primarily welding to hardened steel. found info on the web as to how it can be done. anyone out there have any advice? or better anyone have any experience with this? or know were to find custom axles? thanks

blaynef13 · 07-03-2009, 02:02 PM

Sounds like a neat project! Can't wait to see pics.

sbarnes · 12-05-2009, 08:58 PM

any progress on this project?

mvparcar · 12-05-2009, 11:49 PM

what about a 4x4 quad front axel?

06-29-2009, 08:36 PM	#1
dreadneck Not Yet Wild Join Date: May 2009 Location: orlando Posts: 22	Project 4x4 cushman utv max ok... gonna start this thread and keep you posted on the progress. started off with a cushman that was recovered from a pool. found most the info on stock electronics, how to test the controller, wire diagrams, etc. most info is was found from the manufactures of the parts for the cushman. cushman can send you the manual for your cart if you give them the model and serial number. (FOR THE CUSHMAN GUY) and i found a motor like mine on ge web page.

06-29-2009, 08:45 PM	#2
dreadneck Not Yet Wild Join Date: May 2009 Location: orlando Posts: 22	Re: Project 4x4 cushman utv max My plan is to set up the front axle like a unimog axle. i have a miser axle from a one man cart that is narrow. this will allow the room needed to add gear drive and knuckle for steering. Just an ideal for now but when i get started i will post some pics.

07-03-2009, 01:40 PM	#3
dreadneck Not Yet Wild Join Date: May 2009 Location: orlando Posts: 22	Re: Project 4x4 cushman utv max the first problem I've came to is the universal to be added to the front axle. primarily welding to hardened steel. found info on the web as to how it can be done. anyone out there have any advice? or better anyone have any experience with this? or know were to find custom axles? thanks

07-03-2009, 02:02 PM	#4
blaynef13 Gone Wild Join Date: Mar 2009 Location: Big Sandy, TX Posts: 308	Re: Project 4x4 cushman utv max Sounds like a neat project! Can't wait to see pics.

12-05-2009, 08:58 PM	#5
sbarnes Getting Wild Join Date: Nov 2009 Location: Mayo, FL Posts: 146	Re: Project 4x4 cushman utv max any progress on this project?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-05-2009, 11:49 PM	#6
mvparcar Getting Wild Join Date: Aug 2009 Location: pgh,pa Posts: 126	Re: Project 4x4 cushman utv max what about a 4x4 quad front axel?

Similar Threads
Thread	Forum
Others with a Cushman UTV Max 48V?	Electric golf carts
64 cushman 735	Restoration
Cushman help	Electric golf carts
Cushman UTV	Electric golf carts
1970 Cushman Project	On Road Golf Carts!