lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-22-2010, 10:23 PM   #1
4vertical
Gone Wild
 
4vertical's Avatar
Club Car
 
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
Default drive clutch removal question

ok i know this one is a silly question, but trying to get some info for a guy at the campground about his cart. it is a early 2000ish yami. he wants to replace the drive clutch. said he tried removing the bolt holding the clutch on and could not break it loose with hand tools. so he called and asked me to bring my air tools to help him out. he laready has the puller.

1) what size socket do i need for this bolt?
2) is it right or left hand?
3) how much should it be torqued when it goes back on?( i usually just run my cc ones up with the impact, but don't want to hurt his cart.)

thanks for any and all help. i tried searching but wasn't finding what i was looking for

-Aaron
4vertical is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-23-2010, 06:57 PM   #2
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default Re: drive clutch removal question

[QUOTE=4vertical;459597]ok i know this one is a silly question, but trying to get some info for a guy at the campground about his cart. it is a early 2000ish yami. he wants to replace the drive clutch. said he tried removing the bolt holding the clutch on and could not break it loose with hand tools. so he called and asked me to bring my air tools to help him out. he laready has the puller.

1) what size socket do i need for this bolt?
2) is it right or left hand?
3) how much should it be torqued when it goes back on?( i usually just run my cc ones up with the impact, but don't want to hurt his cart.)

thanks for any and all help. i tried searching but wasn't finding what i was looking for

-Aaron[/QUOTE Sorry I just grab the socket, Think its 21 to 24mm, Counterclockwise to loosen bolt, Specs say 54 ft lbs, I just use the impact to tighten also.
smallblock450sl is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
92 - 3PG Drive Clutch Removal Saga Gas EZGO
drive clutch cover removal Gas Club Car
Drive clutch removal Gas EZGO
My own drive clutch removal thread Gas Club Car
Drive Clutch Removal Gas EZGO


All times are GMT -5. The time now is 03:18 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.