09-01-2012, 01:11 PM | #1 |
Not Yet Wild
Join Date: Aug 2012
Location: ohio
Posts: 51
|
crank seal help??
i have a 1983 244 robins and i would like to change the sleeve gasket and the cranks seals on it (i caught it on fire the other day)i know the sleeve gasket is not an issue but i do not know much about the seals on this thing. first would be how to remove the clutch and starter belt drive.it has a bolt at the end of the crank on this side and i do not know if it is under a lot of pressure or not..... nor do i have even a begining idea for the drive.... the other side i saw was as simple as pulling the fan with the ususal tool (what you can make).... puller..... and the only other thing is should i replace the main gasket that holds the split case together or not seeing as how i toasted the cart after dumpping too much fuel in the carb and letting it drop on the red hot engine...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Blown out crank seal again and again | Gas EZGO | |||
Not just crank seal replacement on G1 | Gas Yamaha | |||
g1 blowing crank seal out | Gas Yamaha | |||
crank seal replacement | Gas Yamaha | |||
Blown Crank Seal | Gas EZGO |