|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-26-2013, 12:25 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Lake Wylie sc
Posts: 36
|
workhorse robin 350 no fire what to change first
2000 model spins over gets power to pos+ side of ignition coil and neg- side goes to steady ground when spinnig over. is it the pulsar, coil or ignitor ? hate to flip a coin but im going to clean all contacts as well as the pulsar first. but is there a way to test any of these? thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-26-2013, 07:34 AM
|
#2 |
|
Gone Wild
 Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: workhorse robin 350 no fire what to change first
I had the exact same symptoms on my 2000 Jacobson 1110 Hauler and it turned out to be a fried ignitor.
|
|
|
|
|
12-27-2013, 12:39 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Lake Wylie sc
Posts: 36
|
Re: workhorse robin 350 no fire what to change first
nevermind, the pulsar was full of gunk. cleaned and drove away.
|
|
|
|
|
12-30-2013, 05:11 PM
|
#4 |
|
Getting Wild
Join Date: May 2009
Location: (winter) Homosassa,Fl / (summer) Bayonne,N.J./ Port Jervis, N.Y.
Posts: 131
|
Re: workhorse robin 350 no fire what to change first
When you say the pulsar was full of gunk, you mean the plug? I'm having problems starting my Workhorse whenever it is damp out. I cleaned all the connections I could find replaced the ignition wires still the same. Where is the plug for the pulsar?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Robin 295 Belt and Governor no change | Gas EZGO | |||
| Workhorse 295 robin not much power | Gas EZGO | |||
| 1995 Workhorse won't fire | Gas EZGO | |||
| Workhorse Belt Change | Gas EZGO | |||
Linear Mode
