|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-18-2015, 09:54 PM | #1 |
Not Yet Wild
Join Date: Jan 2014
Location: Ontario
Posts: 26
|
295 swap to big block?
Hi im looking into putting a big block in my 1993 295cc. the engine is removed valve system is warn out, should I weld a engine plate to each side of the oem engine hangers and set my big block onto that? is there a (plate KIT) I can buy instead ? Not sure what size engine I will be installing yet preferable 15-25 hp wont be buying a Honda so any input on cheap makes will be appreciated. I will be buying a comet driven clutch and upgraded secondary kit. cart is currently lifted on 6" block.
I have put a L/C 2 stroke sled engine into a Yamaha cart I will post a thread in the Yamaha section about it with pics, so im very capable of fabricating ect, again any input is appreciated id like to see what you have done with your swaps . im sure this comes up a lot just having trouble finding anything. thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2015, 07:06 AM | #2 |
Not Yet Wild
Join Date: Aug 2014
Posts: 16
|
Re: 295 swap to big block?
Check out Vegas carts on the web...they should have all the parts you need. I don't have any experience with big block installs but they seem to be the ones most people get parts from.
JG |
Tags |
295, big block, engine plate, enigne swap |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
considering a big block swap | Big Block Talk! | |||
Big Block swap in an EZ-GO | Gas EZGO | |||
Big block swap on a GXT-800 | Big Block Talk! | |||
big block swap | Big Block Talk! | |||
295/BIG BLOCK swap???? | Gas EZGO |