|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-07-2016, 10:06 AM
|
#1 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Starter Brushes
I got a sweet deal on new Yamaha OEM Starter brushes. I plan to replace the ones in my 1990 G8. Here's the thing, the part number that it calls for is JF2-81111-00-00. The deal I got was for part number JF2-H1111-00. If I cross reference the numbers it appears that they're the same but I don't know for sure. When I research the part number it says it's for a Yamaha G22. Also if I look at the cheap aftermarket ones on Ebay they all say for G1-G22. So the only thing that I can do is assume that my new brushes will work.
Can any of the Yamaha experts tell me if they definitely will work? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-07-2016, 02:47 PM
|
#2 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Starter Brushes
Mike, I'm pretty sure those brushes fit any Hitachi generator!!
|
|
|
|
|
04-07-2016, 03:09 PM
|
#3 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: Starter Brushes
Thank Mike. Appreciate the response.
|
|
|
|
|
04-07-2016, 06:32 PM
|
#4 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Starter Brushes
Yep....just the new updated part number. Hitatchi brushes are far better then aftermarket
 |
|
|
|
|
04-07-2016, 07:50 PM
|
#5 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: Starter Brushes
I figure that. I got a crazy deal on them. Bought a dozen brushes for $20. Thats $1.67 each. And that included shipping. Thanks block. Hey while I'm thinking about it I need a spring clip that holds a g16 shifter lever on. Does anybody have one. I guess i should put this in the for sale section.
|
|
|
|
|
04-07-2016, 08:59 PM
|
#6 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Starter Brushes
No ya don't, this is the best way to handle that!!
 |
|
|
|
|
04-08-2016, 07:19 AM
|
#7 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: Starter Brushes
AHH! Thanks Mac. That's fantastic! Can say I ever took notice. Is the shaft already threaded on the inside or do I need to drill it and tap it?
|
|
|
|
|
04-08-2016, 09:03 AM
|
#8 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Starter Brushes
No Mike, but look in the hole of the plastic handle, there is a little dimple at the center, in the mounting hole. I just drilled that dimple out with 3/16 drill! That gave me a centering point (to drill out the center of the splined shaft). With the correct bit to cut threads for a 1/4x20 screw!!
|
|
|
|
|
04-13-2016, 07:10 AM
|
#9 | |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: Starter Brushes
Quote:
 |
|
|
|
|
|
04-13-2016, 07:23 AM
|
#10 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Starter Brushes
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Brushes For Starter | Gas EZGO | |||
| 79 marathon starter/gen brushes? | Gas EZGO | |||
| G14 Starter Brushes | Gas Yamaha | |||
| G3 starter moter brushes? | Gas Yamaha | |||
| Starter Brushes | Gas Club Car | |||
Linear Mode
