|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-06-2016, 09:27 AM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
How fast is the cart going now?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-06-2016, 10:05 AM | #12 |
Not Yet Wild
Join Date: Aug 2016
Posts: 46
|
Re: xct 500 alltrax programming how to
Gps right at 12 mph
|
09-06-2016, 11:03 AM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
In the original G19 wire diagram I see a speed sensor connection to the motor.
I think it will need to have this connected between your new motor and new controller. |
09-06-2016, 12:25 PM | #14 |
Not Yet Wild
Join Date: Aug 2016
Posts: 46
|
Re: xct 500 alltrax programming how to
|
09-06-2016, 12:33 PM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
LOL - you better get a trailer full of batteries!
Good looking cart. So did the OEM motor have a pigtail connected into the wire harness? and - is that harness connection still there? |
09-06-2016, 01:55 PM | #16 |
Not Yet Wild
Join Date: Aug 2016
Posts: 46
|
Re: xct 500 alltrax programming how to
Yes there is a 3 prong stock plug. But the D&D motor didnt have pigtail or any type of wires coming out of it so the stock plug was never hooked up.
Im having another issue now...i put the cart on the monitor tab and throttle position is holding at 87%? When i push the pedal it lungs forward. I adjusted the throttle sensitivity to like 14 percent and it still does it. |
09-06-2016, 03:09 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
Water in the ITS box?
|
09-06-2016, 03:10 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
What motor model # exactly do you have?
|
09-06-2016, 03:10 PM | #19 |
Not Yet Wild
Join Date: Aug 2016
Posts: 46
|
Re: xct 500 alltrax programming how to
Could be i just washed the cart.....i take it it will dry out?
|
09-06-2016, 03:19 PM | #20 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: xct 500 alltrax programming how to
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax programming | Electric EZGO | |||
Alltrax Programming | Electric EZGO | |||
alltrax programming | Electric EZGO | |||
Bench programming alltrax | Electric EZGO | |||
Alltrax axe programming | Electric EZGO |