|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-16-2017, 03:21 PM | #1 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Tie rods g16
Wonder why there are two different sets of tie rods available for the G16? I don't know which ones to get, any insight out there?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2017, 03:40 PM | #2 |
Not Yet Wild
Join Date: Apr 2015
Location: North Alabama
Posts: 19
|
Re: Tie rods g16
on my 96 g16 there is a inner and a outer . They are different part numbers . I look all my stuff up here https://www.shopyamaha.com/parts-catalog/lines/golfcar . Just type in your year and model . This had been very helpful to me .
|
03-17-2017, 06:36 AM | #3 |
Not Yet Wild
Join Date: Aug 2016
Posts: 21
|
Re: Tie rods g16
Based on the shopyamaha site you need tie rods that have a female thread. I ordered tie rods for my g16 and had tie rods with the female thread sent to me only to see my tie rod has male ends on them. Not sure if mine where replaced at some point or not. But it looks to be cheaper to just replace the whole thing
|
03-17-2017, 06:43 PM | #4 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Re: Tie rods g16
Thanks guys. I think mine are the same and obviously out of whack. The driver side is limited out so I'm going to have to turn them both out and start from scratch. Hopefully they will toe.
|
03-19-2017, 10:22 AM | #5 |
Not Yet Wild
Join Date: Aug 2016
Posts: 21
|
Re: Tie rods g16
my tie rods of the same style as yours. which is not what the oem parts finder shows lol.. But aside from that which tie rods are the best to go with for a lifted cart? oem yamaha? or just something from buggies unlimited?
|
03-20-2017, 06:10 AM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Tie rods g16
I didn't go to the site, but do you need tie rods, or tie rod ends? One end of each tie rod is left hand thread, and the other end is right hand thread. You will need two left hand thread, and 2 right hand thread, tie rod ends as well!!
And I'd suggest you stay away from "Buggies Unlimited". Not a good place to do business!! |
03-20-2017, 05:57 PM | #7 |
Not Yet Wild
Join Date: Mar 2017
Location: Mentor, Ohio
Posts: 38
|
Re: Tie rods g16
I think I'm going to just replace both entire tie rod assemblies. Do you recommend anyone in particular? Thanks.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G 16 tie rods | Gas Yamaha | |||
81 g1 tie rods | Golf Carts and Parts | |||
Tie rods | Electric Club Car | |||
G16 tie rods | Gas Yamaha | |||
??? about rods | Gas EZGO |