Part Id Yamaha G14

tfbutler · 12-07-2018, 11:40 AM

Noticed this part under the air filter assembly. It currently does not have a nut on the other end. I could not locate it in any diagrams i currently have.

cgtech · 12-07-2018, 11:57 AM

Here ya go

9, 10, 11, 12

raydhd · 12-07-2018, 12:38 PM

The engine tensioner cable and yours needs some slack taken out.

dezrcr822 · 12-07-2018, 02:16 PM

Yeah and if its loose or missing it will tear up your motor mounts really quick. Ask me how I know.

cgtech · 12-07-2018, 03:10 PM

I think the nuts are regular M6-1.0, and there should be 2 of them

dezrcr822 · 12-07-2018, 04:08 PM

You might want to put those threads to a wire wheel and clean them up nice. I used a dab of blue locktite when I put mine together. Had to retighten it after a few good pulls as it was new and stretched a little. That assembly for my cart was the price of two motor mounts.

tfbutler · 12-07-2018, 07:55 PM

Anyone have a pic of what it should look like? I take it a nut on both sides?

dezrcr822 · 12-07-2018, 09:07 PM

Quote:

Originally Posted by tfbutler

Anyone have a pic of what it should look like? I take it a nut on both sides?

My G1 set up looks very similar and has both nuts on the same side with a gap of 0.5mm between the two washers one rubber one steel. You may want to verify for the G14 application before proceding.

dezrcr822 · 12-07-2018, 09:11 PM

If you blow up the pic in cgtech's post you can see the correct orentiation.

tfbutler · 12-07-2018, 09:14 PM

Great thank you all! 12$ from partzilla!

12-07-2018, 12:38 PM	#3
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,639	Re: Part Id Yamaha G14 The engine tensioner cable and yours needs some slack taken out.

12-07-2018, 02:16 PM	#4
dezrcr822 Gone Wild Join Date: Mar 2018 Location: The Desert Posts: 248	Re: Part Id Yamaha G14 Yeah and if its loose or missing it will tear up your motor mounts really quick. Ask me how I know.

12-07-2018, 03:10 PM	#5
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Part Id Yamaha G14 I think the nuts are regular M6-1.0, and there should be 2 of them

12-07-2018, 04:08 PM	#6
dezrcr822 Gone Wild Join Date: Mar 2018 Location: The Desert Posts: 248	Re: Part Id Yamaha G14 You might want to put those threads to a wire wheel and clean them up nice. I used a dab of blue locktite when I put mine together. Had to retighten it after a few good pulls as it was new and stretched a little. That assembly for my cart was the price of two motor mounts.

12-07-2018, 07:55 PM	#7
tfbutler Not Yet Wild Join Date: Dec 2010 Location: Harper Ferry , WV Posts: 21	Re: Part Id Yamaha G14 Anyone have a pic of what it should look like? I take it a nut on both sides?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-07-2018, 09:11 PM	#9
dezrcr822 Gone Wild Join Date: Mar 2018 Location: The Desert Posts: 248	Re: Part Id Yamaha G14 If you blow up the pic in cgtech's post you can see the correct orentiation.

12-07-2018, 09:14 PM	#10
tfbutler Not Yet Wild Join Date: Dec 2010 Location: Harper Ferry , WV Posts: 21	Re: Part Id Yamaha G14 Great thank you all! 12$ from partzilla!

Similar Threads
Thread	Forum
Looking for Yamaha G8E part	Electric Yamaha
Yamaha part out today only.	Golf Carts and Parts
Complete Part Out Yamaha G1	Golf Carts and Parts
Yamaha transmission part	Golf Carts and Parts
G2/G9 yamaha part out	Golf Carts and Parts