G2/G9 seats

yammie · 05-15-2019, 09:53 PM

Hi guys I just have a question I’m curious if rear seat seats made for a g2/g9 rear seat will fit the front bottom and top

LukeL · 05-15-2019, 10:38 PM

The way those models are designed, they might work, but they might not look as good. Rear seat cushions are usually smaller.

G1-G9 · 05-16-2019, 07:08 AM

The bottoms of a G2 and G9 will inter change. The backs will not. The plastics are different on the back of them and the back frame is different. As far as the rear seats for a G2/G9 they might with a little work.

CP241 · 05-16-2019, 07:36 AM

could you make the back seat work on at G2/G9? yes.

Would it look good? no.

The seat bottom is WAY bigger than a rear seat (Assuming you're talking about a madjax type rear seat). I would cut some plywood, cut up an old couch cushion, and buy $15 worth of vinyl from hobby lobby and just make my own seats.

yammie · 05-16-2019, 08:02 AM

Thanks guys, I’ll probably end up making my own

05-15-2019, 09:53 PM	#1
yammie Getting Wild Join Date: Feb 2011 Location: Ohio Posts: 96	G2/G9 seats Hi guys I just have a question I’m curious if rear seat seats made for a g2/g9 rear seat will fit the front bottom and top

05-15-2019, 10:38 PM	#2
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: G2/G9 seats The way those models are designed, they might work, but they might not look as good. Rear seat cushions are usually smaller.

05-16-2019, 07:08 AM	#3
G1-G9 LIFE IS TAKING FOREVER Join Date: Apr 2010 Location: DANSVILLE NY Posts: 5,327	Re: G2/G9 seats The bottoms of a G2 and G9 will inter change. The backs will not. The plastics are different on the back of them and the back frame is different. As far as the rear seats for a G2/G9 they might with a little work.

05-16-2019, 07:36 AM	#4
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,683	Re: G2/G9 seats could you make the back seat work on at G2/G9? yes. Would it look good? no. The seat bottom is WAY bigger than a rear seat (Assuming you're talking about a madjax type rear seat). I would cut some plywood, cut up an old couch cushion, and buy $15 worth of vinyl from hobby lobby and just make my own seats.

05-16-2019, 08:02 AM	#5
yammie Getting Wild Join Date: Feb 2011 Location: Ohio Posts: 96	Re: G2/G9 seats Thanks guys, I’ll probably end up making my own

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
DS seats	Electric Club Car
seats for a G1	Gas Yamaha
Replacing bench seats with boat seats (2001 EZ-Go)	Design Center
Seats	Gas Columbia ParCar
New Seats from XT	Gas Yamaha