|
04-19-2020, 07:47 PM
|
#1 |
|
Gone Wild
 Join Date: Sep 2010
Location: Sandston,Va
Posts: 180
|
Front End Alignment
I have 02 CC DS with a 6 inch Jakes spindle lift with a heavy duty front spring. It has about 1/2 inch of negative camber in each front wheel. I just replaced the bushings on the front spring and it got them straightened up to the point where I am now. I can not find any other adjustments for camber. Thanks for the help.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-20-2020, 10:44 AM
|
#2 |
|
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Front End Alignment
The only adjustment for camber is to center the leaf spring so the camber is the same on both sides. There is no adjustment to set the camber to true 0.
To do any other adjustment than that you need an A Arm lift. |
|
|
|
|
04-20-2020, 07:51 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2010
Location: Sandston,Va
Posts: 180
|
Re: Front End Alignment
Thanks for the response. The new bushings cut the lean in half. It is not to bad now. I will have to live with it.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| front end alignment G-22E | Electric Yamaha | |||
| Front end alignment | Gas Yamaha | |||
| alignment of front end | Electric Club Car | |||
| Front end alignment on a 97? | Gas Club Car | |||
| Front-end alignment | Gas Club Car | |||
Linear Mode
