2002 Cart "dumped" a part and...

[Land Owner]

...idk its name in order to order a new one.

Front suspension ==> immediately forward of the motor, "squishes" on and expands against the cross member there.

Vibration isolator?

[The Penguin]

you've got a parts diagram but can't figure out the name? :)

it's called a "snubber"

[CP241]

It’s a snubber. You can get them on Amazon for about 6 bucks, which is fine if the tang on the motor cradle it mounts to can be removed with the 2 bolts (newer cart).

But if your cart is the older style where the tang it mounts to is actually part of the engine cradle, I’d get an oem one from revolution. It will last a lot longer.

Reason for distinction is the cheap ones won’t last as long, but work fine. And if the tang unbolts then it’s literally a 5 minute job to replace it. And it should still last a couple years before it wears out and needs replacement (if that soon even). But if you have the older style cart (early 90’s) then it’s a real PITA to change it. You’ll need to unbolt the rear axle and slide the whole shebang backwards to get it in. You’ll not want to replace that every couple years.

[Land Owner]

Have diagrams. No parts list. Where to find a list?

Snubber then. OEM then. Work to do.

Thank you.

[lockman1]

Here you go...

01-02-DS IPL.pdf