|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-01-2010, 09:29 PM | #11 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: PDS Toggle Switch Mount
Got it We have also used a stainless "L" bracket to mount the switch.
Don't know where we got them from, but I assume they were from some older top kits? I like trimming the cover the best, as adding some protection to the buss bars can only insurance! You can re-drill and tap the two top holes to mount the modified cover a little higher... |
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2010, 11:19 PM | #12 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: PDS Toggle Switch Mount
What kind of 2/0 cable are we talking about?
|
06-02-2010, 05:57 AM | #13 |
Gone Wild
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
|
Re: PDS Toggle Switch Mount
This cable on top of the battery pack, to the controller and motor.
|
06-03-2010, 01:49 PM | #14 |
Gone Wild
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
|
Re: PDS Toggle Switch Mount
Here's what I got. Trimmed up the controller cover to allow the cables in and out, it is now more of a bracket than a cover.
I have to get in there with some wire ties and clean it all up a little. |
06-03-2010, 02:03 PM | #15 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: PDS Toggle Switch Mount
i have seen covers come in with spacers between the cover and the heat sink to give space for the bigger cables. The spacers were the same spacers that are used on the top bolts for the frt struts - roof support.
|
06-03-2010, 06:36 PM | #16 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: PDS Toggle Switch Mount
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
G2 - G9 Toggle Switch On Cup Holder | Gas Yamaha | |||
Headlights will not come on, but toggle switch is lit up? | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |