|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-21-2010, 11:31 AM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 7
|
Alltrax 500 Mounting Ideas and Pics
I have a 2007 ezgo pds and I am going to install a 500 amp alltrax controller and I have been told it will not fit under the factory cover does anybody have any pics of how they mounted theirs and how you mounted the solenoid as well and the tow/run switch. Any ideas or help is great!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2010, 12:27 PM | #2 | |
Gone Wild
Join Date: Feb 2010
Location: Alabama
Posts: 455
|
Re: Alltrax 500 Mounting Ideas and Pics
Quote:
|
|
09-21-2010, 04:51 PM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Alltrax 500 Mounting Ideas and Pics
I mount them the same as factory, but just cut the bottom off the box. I leave the top half on for some kind of protection on the wires.
|
09-21-2010, 04:55 PM | #4 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Alltrax 500 Mounting Ideas and Pics
|
09-21-2010, 08:55 PM | #5 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Alltrax 500 Mounting Ideas and Pics
Husker, you have that fuse on the wrong wire.... didn't you read the instructions that came with that controller? The Fuse goes to the Negative terminal....... lmao.
Colby, if you look up my thread about a solenoid activated F&R, you will see the way I mount mine...... |
09-21-2010, 09:01 PM | #6 | |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Alltrax 500 Mounting Ideas and Pics
Quote:
The fuse may be installed anywhere in the battery string or at either (+) or (-) end of the battery pack where it connects to the controller or solenoid. |
|
09-22-2010, 03:02 AM | #7 |
Gone Wild
Join Date: Jul 2010
Location: down under
Posts: 253
|
Re: Alltrax 500 Mounting Ideas and Pics
|
09-22-2010, 06:29 AM | #8 | |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Alltrax 500 Mounting Ideas and Pics
Quote:
Aussie I never cut the cover until I have tested the cart and make sure it is running ok first, when I test drive I just hook up the toggles switch with the cover just sitting there kinda like hangin, drive it, then when I am happy with the settings I then disconnect the cart again remove the toggle with the cover and then off to the chop saw. |
|
09-22-2010, 06:43 AM | #9 | |
Gone Wild
Join Date: Jul 2010
Location: down under
Posts: 253
|
Re: Alltrax 500 Mounting Ideas and Pics
Quote:
|
|
09-22-2010, 09:41 AM | #10 |
Not Yet Wild
Join Date: Sep 2010
Posts: 7
|
Re: Alltrax 500 Mounting Ideas and Pics
Where can I get one of the factory fuses that mount from the cable to the battery post? I just need a factory one right now mine is melted because my cable came loose the other day. Can I buy it at a local parts store?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
need ideas on mounting big block | Big Block Talk! | |||
Need ideas guys... PICS! | Gas Yamaha | |||
Batteries in Bagwell....Mounting Solution- Pics | Electric EZGO | |||
Does anyone have pics of an alltrax controller installed on an EZGO PDS? | Electric EZGO | |||
Anyone have pics of G1 with radio installed looking for ideas!! | Gas Yamaha |