light kit install problem

Sledgehammer · 03-23-2011, 10:11 AM

Well this is a first for me. I have a n 06 precedent w/350 motor. Purchased a Madjax head and taillight kit. Supposed to be plug and go. The plugging went very well, with all the harnesses. However lights won,t work. If I use a test light grounded to the battery I have juice all the way to the bulbs. when test light is removed there is no juice anywhere. it appears to me to be a ground problem, but i am not very knowledgeable on wiring and such. any Ideas on where to start now?

GLEEMO · 03-24-2011, 10:12 AM

so where is the -ground wire on the new harness, now going ?
Did it come with instruction sheet ?
Can U scan instructions and post them here ?

Sledgehammer · 03-24-2011, 10:32 AM

thank you for the reply. the ground is in the harness supplied with the kit. it all plugs into the factory harness.
sorry i am not computer savy enough to download the instructions. i did get a copy of them form madjax.com.

since the ground is in the harness i assume it is grounded like everything else on the cart. you know what they say about assumptions.
thanks again for the reply.

GLEEMO · 03-24-2011, 10:38 AM

Go to the site/page where U got the instructions.
then copy and past the URL here

It sounds like the ground needs to be connected back to -Neg battery some way.
Perhaps the factory harness has a broken wire ?

Sledgehammer · 03-24-2011, 10:44 AM

I will look that url up tonite when i get home from work and paste on here. thanks

Sledgehammer · 03-24-2011, 02:38 PM

http://www.mymadjax.com/
this is the url for the light kit i have installed. hope this helps.
thanks

GLEEMO · 03-24-2011, 05:26 PM

Is this the instructions U got ?

GLEEMO · 03-24-2011, 05:27 PM

Never Mind I got it, U's is prercident correct ?

Sledgehammer · 03-24-2011, 07:12 PM

yes, i have a precdent gas. in the instructions it talks about a supplmental harness for gas carts. i got that from the dealer with the kit. it is installed and thats where i am at.

GLEEMO · 03-24-2011, 07:23 PM

OK so here is the instructions for the add on

Did U get this ?

03-23-2011, 10:11 AM	#1
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	light kit install problem Well this is a first for me. I have a n 06 precedent w/350 motor. Purchased a Madjax head and taillight kit. Supposed to be plug and go. The plugging went very well, with all the harnesses. However lights won,t work. If I use a test light grounded to the battery I have juice all the way to the bulbs. when test light is removed there is no juice anywhere. it appears to me to be a ground problem, but i am not very knowledgeable on wiring and such. any Ideas on where to start now?
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-24-2011, 10:12 AM	#2
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem so where is the -ground wire on the new harness, now going ? Did it come with instruction sheet ? Can U scan instructions and post them here ?

03-24-2011, 10:32 AM	#3
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem thank you for the reply. the ground is in the harness supplied with the kit. it all plugs into the factory harness. sorry i am not computer savy enough to download the instructions. i did get a copy of them form madjax.com. since the ground is in the harness i assume it is grounded like everything else on the cart. you know what they say about assumptions. thanks again for the reply.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-24-2011, 10:38 AM	#4
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem Go to the site/page where U got the instructions. then copy and past the URL here It sounds like the ground needs to be connected back to -Neg battery some way. Perhaps the factory harness has a broken wire ?

03-24-2011, 10:44 AM	#5
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem I will look that url up tonite when i get home from work and paste on here. thanks
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-24-2011, 02:38 PM	#6
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem http://www.mymadjax.com/ this is the url for the light kit i have installed. hope this helps. thanks
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-24-2011, 05:27 PM	#8
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem Never Mind I got it, U's is prercident correct ?

03-24-2011, 07:12 PM	#9
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem yes, i have a precdent gas. in the instructions it talks about a supplmental harness for gas carts. i got that from the dealer with the kit. it is installed and thats where i am at.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Precedent light kit - hard install?	Electric Club Car
Light kit install	Gas Yamaha
want to install a light kit	Electric Club Car
Brake light install	Electric Yamaha
Gas Club Car Light Install	Gas Club Car