Opnions on this lift kit please?

[zachalyse]

Looks like a decent price. Just don't want to buy anything that is junk.

http://www.golfcartking.com/club-car...al-p-5625.html

[shadowman]

i looked and my opinion is i,m not impressed with it.................you asked........................

[zachalyse]

What is it that doesn't impress you? The brand? The tires? Quality???? Specifics would help more than just an impression. If it's simply based on prefering aluminum rims and nobby tires, that doesn't bother me but if it's based on knowledge of poor quality product then that helps me.

[blake80]

im not impressed either. i did the allsport 6" super sport lift and 23" swamp fox tires with 10" black steel wheels for around $700. i got it all from 3R (site sponsor). plus, im not a big fan of spindle lifts. ive seen to many break.

[zachalyse]

Hey Balke80 - Thank you. This is the type of opinion I was looking for. I've searched for the similar setup as you and most everything I find is pushing $850 to $900.

[blake80]

you have to be careful with the 23's. speed motors dont really seem to like them from what ive been told. i have a very very nice pq motor in my dads cart with a 500amp ge controller with 2ga welding cable. going slow with others on the rear over heats it. but, at full speed i have no troubles. if you have a tourqe motor you probably wont have any issues.

[blake80]

dont forget that most all of our site sponsors give members discounts. thats how i was able to keep the cost down on the lift and tires

[2monsters]

I have seen more spindle lifts get trashed off roading. Depends on what your going to be doing with your buggie I guess.

I went with a 6" AS Super Sport lift as well. I also have 22" Mud Lites on 10" black powder coated rims. It cost me $200 more than blake's but I could not be happier.

I have been on some serious off road trails and my lift has handled it well.

[zachalyse]

Originally Posted by blake80

you have to be careful with the 23's. speed motors dont really seem to like them from what ive been told. i have a very very nice pq motor in my dads cart with a 500amp ge controller with 2ga welding cable. going slow with others on the rear over heats it. but, at full speed i have no troubles. if you have a tourqe motor you probably wont have any issues.

My cart is stock with the FE290. Will I have a problem with 23's?

[rose88]

We have been running Jake's spindle lifts with no problems for 4 years now. Never had a MFG problem or breakage?

I have seen some of the spindle kits that looked alot cheaper made and in price.

You get what ya pay for, or you gotta PAY 2 PLAY