anyone have a 1018337-01 in stock?

TURF1-RYC · 10-06-2011, 01:29 PM

i have been all over the web looking for a starter generator, ether they want an arm and a leg, or they wont have then in stock till novenber,,its for my 2000 club car turf 1 carry all... thanks

shadowman · 10-06-2011, 05:21 PM

why do you need a starter? yours can,t be rebuilt or ???.....................

TURF1-RYC · 10-06-2011, 05:46 PM

I took it apart, first time I look inside a starter,i don't know what all it needs.. I know it needs the brush kit, bearings, pulley and the shaft threads are crossthreaded too..but I don't wanna get over my head with parts . I just bought the cart.. and it was running counter-clockwise instead of clockwise like it should.. I switched some wires, it ran clockwise for about five second and then it smoked.. nothing else after that.should I attempt to rebuild it?...

crash12888 · 10-06-2011, 07:08 PM

Sounds like you've done all you can do and should take it to repair shop to see if they can put the smoke back in it.
A thread file will fix most shaft thread issues, Pulley bad too? Someone should consider buying a service manual if they are going to continue to do their own work.

TURF1-RYC · 10-06-2011, 07:26 PM

i bought the cart like that,, some one had beat the fudge out of the pulley..i dont want this lil delema to hold my project up, i cant wait to fire up my turf 1.. first time owner.. and going all out with lift kit and al..l i hope to post up some pics when its all done , but i got to get it running first..lol

G2Rebel · 10-06-2011, 08:21 PM

Have you looked into the starters that are "unique"? They can be wired ccw or cc.

ckiguy · 10-06-2011, 08:24 PM

hey i wander if he can call plum quick and have them hook him up! be one heck of a starter genny! its might be considered a partial core though! just a option! plus surrporting a site sponsor!

TURF1-RYC · 10-06-2011, 08:34 PM

I have seen the unique that can be wires to run cw or ccw are they any good? Is that the direction I should go

Ckiguy, I'm open to anything.. if I can trade it as core that would be great.. any help would be great

ckiguy · 10-07-2011, 03:11 PM

I dont know if they do starter gennys, but i know they do motors! And they can get the parts and they have the resourses to do it. I would say give them a hollar and see what they would do. Might be a bit expensive, but a option!

TURF1-RYC · 10-11-2011, 06:59 PM

thanks guys, i allready have one coming..

10-06-2011, 01:29 PM	#1
TURF1-RYC Not Yet Wild Join Date: Sep 2011 Location: florida Posts: 25	anyone have a 1018337-01 in stock? i have been all over the web looking for a starter generator, ether they want an arm and a leg, or they wont have then in stock till novenber,,its for my 2000 club car turf 1 carry all... thanks

10-06-2011, 05:21 PM	#2
shadowman The Last Moja Morani Join Date: Jan 2007 Location: jumping from cart to cart Posts: 8,975	Re: anyone have a 1018337-01 in stock? why do you need a starter? yours can,t be rebuilt or ???.....................

10-06-2011, 05:46 PM	#3
TURF1-RYC Not Yet Wild Join Date: Sep 2011 Location: florida Posts: 25	Re: anyone have a 1018337-01 in stock? I took it apart, first time I look inside a starter,i don't know what all it needs.. I know it needs the brush kit, bearings, pulley and the shaft threads are crossthreaded too..but I don't wanna get over my head with parts . I just bought the cart.. and it was running counter-clockwise instead of clockwise like it should.. I switched some wires, it ran clockwise for about five second and then it smoked.. nothing else after that.should I attempt to rebuild it?...

10-06-2011, 07:08 PM	#4
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: anyone have a 1018337-01 in stock? Sounds like you've done all you can do and should take it to repair shop to see if they can put the smoke back in it. A thread file will fix most shaft thread issues, Pulley bad too? Someone should consider buying a service manual if they are going to continue to do their own work.

10-06-2011, 07:26 PM	#5
TURF1-RYC Not Yet Wild Join Date: Sep 2011 Location: florida Posts: 25	Re: anyone have a 1018337-01 in stock? i bought the cart like that,, some one had beat the fudge out of the pulley..i dont want this lil delema to hold my project up, i cant wait to fire up my turf 1.. first time owner.. and going all out with lift kit and al..l i hope to post up some pics when its all done , but i got to get it running first..lol

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-06-2011, 08:21 PM	#6
G2Rebel Gone Wild Join Date: Apr 2010 Location: Interlachen,Fl Posts: 326	Re: anyone have a 1018337-01 in stock? Have you looked into the starters that are "unique"? They can be wired ccw or cc.

10-06-2011, 08:24 PM	#7
ckiguy Bad *** Speller! Join Date: Oct 2009 Location: Columbus, Ohio Posts: 1,338	Re: anyone have a 1018337-01 in stock? hey i wander if he can call plum quick and have them hook him up! be one heck of a starter genny! its might be considered a partial core though! just a option! plus surrporting a site sponsor!

10-06-2011, 08:34 PM	#8
TURF1-RYC Not Yet Wild Join Date: Sep 2011 Location: florida Posts: 25	Re: anyone have a 1018337-01 in stock? I have seen the unique that can be wires to run cw or ccw are they any good? Is that the direction I should go Ckiguy, I'm open to anything.. if I can trade it as core that would be great.. any help would be great

10-07-2011, 03:11 PM	#9
ckiguy Bad *** Speller! Join Date: Oct 2009 Location: Columbus, Ohio Posts: 1,338	Re: anyone have a 1018337-01 in stock? I dont know if they do starter gennys, but i know they do motors! And they can get the parts and they have the resourses to do it. I would say give them a hollar and see what they would do. Might be a bit expensive, but a option!

10-11-2011, 06:59 PM	#10
TURF1-RYC Not Yet Wild Join Date: Sep 2011 Location: florida Posts: 25	Re: anyone have a 1018337-01 in stock? thanks guys, i allready have one coming..

Similar Threads
Thread	Forum
07 Stock PDS value	Electric EZGO
Stock controller and Stock Solenoid from PDS for sale	Golf Carts and Parts
How big of a tire on a stock cart with stock rims ?	Electric golf carts
stock 92 36v cc	Electric Club Car
My stock 91 cc	Gas Club Car