|
05-10-2012, 10:06 AM
|
#11 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
I'll check that out but this is a new stock carb just put on last week.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-10-2012, 10:11 AM
|
#12 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
This is a new carb so shouldn't it be in a stock position?
|
|
|
|
|
05-10-2012, 10:22 AM
|
#13 |
|
Gone Wild
Join Date: Apr 2012
Location: SE Michigan
Posts: 297
|
Re: Drive wont engage
^^
You would think so, and realistically it probably is, but if the problem persists it may be worth checking. It's not hard to pull the bowl off and have a quick look at the float. |
|
|
|
|
05-10-2012, 12:08 PM
|
#14 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
which screws do what on the outside of the carb?
|
|
|
|
|
05-11-2012, 01:24 PM
|
#15 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
i unhooked the black wire of the rev limiter and it's drives almost normal......i'm guessing my rmp limiter is bad?
|
|
|
|
|
05-14-2012, 04:16 PM
|
#16 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
I unhooked the ground wire for the rev limiter and it's runs almost perfect/ i ordered another limiter. The one that came doesn't have the same wire connections. The old one has 3 cables coming out of it. The new one only has two......how is this connected? Anyone have any pics of theirs?
|
|
|
|
|
05-14-2012, 04:19 PM
|
#17 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
I also noticed the spark plug i replaced was NGK BPR5ES and not the NGK BPR4ES that was in it. I put the old one back in it and it seems to be firing properly. I hear that it needs the exact spark plug or they run like crap. Would a new ignition coil help as well while im at it?
|
|
|
|
|
05-14-2012, 08:47 PM
|
#18 | |
|
revolutiongolfcars.com
 Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Drive wont engage
Quote:
|
|
|
|
|
|
05-14-2012, 09:21 PM
|
#19 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
The one on the left is the old one, the one on the right is new. The connections arent the same. Do i cut the one with double black wires coming out of the old one and put a connector to adapt it to the new round adapter on the new so i get a ground wire and the right connection on the micro switch? |
|
|
|
|
05-15-2012, 09:25 AM
|
#20 |
|
Not Yet Wild
Join Date: Mar 2012
Posts: 26
|
Re: Drive wont engage
Never mind on that pic i see the one on the right is the voltage regulator not the rmp limiter.......learning as i go. Do the voltage regs go bad?
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| gas golf cart yamaha clutch wont engage | Gas Yamaha | |||
| Clutch wont engage | Gas EZGO | |||
| Drive clutch not closing to engage belt | Gas Club Car | |||
| Drive will not engage-2002 Gas Txt | Gas EZGO | |||
| Rear clutch wont engage | Big Block Talk! | |||
Linear Mode
