2022 Evolution Controller Software

[Twojays]

Hey Matt, I've heard about you from local people and have tried to find you online for what seems like forever now! Any chance you can pm me at Jaysurfsalot@gmail.com? I'm interested in the usb cable you make. Thanks brother I hope to hear from you.

[Twojays]

Originally Posted by KRAZYMATT

Hit the default highlighted buttons, it will go through and install. That’s just the installation portion and it’s Chinese. The software is English.

Hey Matt, I've heard about you from local people and have tried to find you online for what seems like forever now! Any chance you can pm me at Jaysurfsalot@gmail.com? I'm interested in the usb cable you make. Thanks brother I hope to hear from you. 🙏

[Virjose]

Anyone with experience on the regenerative braking settings? Seems like our new Maverick 6 is only using the disk brakes and not the motor to slow down. Thanks for any advice. Also, if anyone is in San Diego area and able to program evolution carts, please let me know :)

[Duffer99]

Originally Posted by BobInDaytona

I have the software and cable. Believe it or not - I have yet to encounter a 2022 evolution in our area.
I live in Daytona Beach as my name suggests - anyone have a 2022 in the area we can play with?

I have a 2024 D5 and live in Apopka. Would you be willing to upgrade? Sell me the cable and software?

[glenn925]

Hey all. I am trying to program my D5 Maverick 6. But the max I can get it to is 27mph. For the speed programming, it was set to 5,500 but the MAX is sent to 6,000. I can only change the value to 6,000 which gets it to 27 MPH. Any thoughts on how to change the MAX value and/or what else to do to get it up to 35?

[Tmluke2]

I’m having the problem TexasEVO did. Not sure how to attach files to get this program to let me in.

[evoster]

Originally Posted by Virjose

Anyone with experience on the regenerative braking settings? Seems like our new Maverick 6 is only using the disk brakes and not the motor to slow down. Thanks for any advice. Also, if anyone is in San Diego area and able to program evolution carts, please let me know :)

What controller model do you have?

If you have the EV48-400 or EV48-400-A ;

Calibration > Zonal gear mode >

1 partition deceleration of P mode (rpm/s)
2 partition deceleration of P mode (rpm/s)
3 partition deceleration of P mode (rpm/s)
4 partition deceleration of P mode (rpm/s)
5 partition deceleration of P mode (rpm/s)
6 partition deceleration of P mode (rpm/s)
7 partition deceleration of P mode (rpm/s)

- Setting higher “rpm/s” will provide stronger deceleration on Forward direction at
high speed mode (P mode) .
- Conversely setting smaller ““rpm/s” will provide softer deceleration

If you have the EV48-400-C :

Calibration > Standard gear mode >
0-500 rpm Forward Acceleration Value
500-1000 rpm Forward Deceleration Value
1000-2000 rpm Forward Deceleration Value
2000-3000 rpm Forward Deceleration Value
3000-4000 rpm Forward Deceleration Value
4000-5000 rpm Forward Deceleration Value
5000-6000 rpm Forward Deceleration Value

Sets the deceleration rate that is used to slow down the vehicle when the throttle is
released. Larger values represent faster response (strong deceleration feeling), small
values (rpm/s) represent slower response (soft deceleration feeling ).

Different rpm represent the different speed zone from low speed to high speed.

It`s recommended to adjust all the rpm range deceleration value synchronously otherwise the deceleration process may not be smooth, you may experience uncomfortable deceleration.