lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-09-2015, 06:56 PM   #1
express
Getting Wild
 
Join Date: Jul 2014
Posts: 131
Default Light kit / Turn signal wiring help

I am installing a street legal kit on my G9 and could use some help. I purchased this light kit and turn signal kit:

http://www.everythingcarts.com/p-460...light-kit.aspx

http://www.everythingcarts.com/p-128...universal.aspx

I am not a fan of wiring in the first place and you would think a plug n play complete kit would be available instead of having to splice two kits together.

Am I suppose to replace the relay in the light kit with the flasher/relay from the turn signal switch?
express is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-09-2015, 10:03 PM   #2
express
Getting Wild
 
Join Date: Jul 2014
Posts: 131
Default Re: Light kit / Turn signal wiring help

I was lookin at it all bass ackwards. Got it figured out and mocked up. Just need to find a clean way to route the wires, switches and relays.

You end up having two extra hot leads from the running lights when adding the blinkers. Is there any reason why I couldn't use these to run addition lights? I was thinking about using some small LED pods I have laying around for glovebox lights.
express is offline   Reply With Quote
Old 04-09-2015, 11:04 PM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,443
Default Re: Light kit / Turn signal wiring help

Should be fine for leds. I have never used the harness that came with the aftermarket lights. I have my own harness we build ourselves with all wires needed for turn signals & brake lights on cars not factory equipped with lights. All the light systems i built were already ready for turn signals if desired later. Sorry i could not help with your harness, but i simply didnt know.
cgtech is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
2010 g29 drive turn signal/light diagram help Electric Yamaha
PDS Turn Signal & Brake Light Install Electric EZGO
turn signal wiring Gas Club Car
Light kit - can it work with brake switch and turn signal? Electric EZGO
Turn signal and brake light wiring Electric EZGO


All times are GMT -5. The time now is 09:26 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.