|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2011, 11:15 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 9
|
Seat back posts for 89 ezgo
I need to fabricate new seatback posts for my 1989 ezgo. When I purchased it they were missing. Can anyone help me with total length of post, angle of bend etc. I have some 1" tubing already, just want to make them as close to original as possible. Or better yet, if you have a set you are willing to part with, let me know!
Thanks Craig |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2011, 11:41 PM | #2 |
Gone Wild
Join Date: May 2011
Location: New Caney, Texas
Posts: 188
|
Re: Seat back posts for 89 ezgo
Are you making just the posts for the seats or both pieces for the roof also?
|
06-24-2011, 12:06 AM | #3 |
Not Yet Wild
Join Date: Jun 2011
Posts: 9
|
Re: Seat back posts for 89 ezgo
just the posts to mount the seatbacks to....I think the stock ones have a triangle or diamond shaped plate at the top of them to mount the individual seatbacks to....You don't happen to have a set of them to get rid of do you?
Craig |
06-24-2011, 10:30 PM | #4 |
Gone Wild
Join Date: May 2011
Location: New Caney, Texas
Posts: 188
|
Re: Seat back posts for 89 ezgo
Sure dont, but tomorrow I can take some pictures and give some dimensions for the ones I have. I chopped mine as I am not going to use the hardtop any more.
|
06-28-2011, 11:52 AM | #5 |
Gone Wild
Join Date: May 2011
Location: New Caney, Texas
Posts: 188
|
Re: Seat back posts for 89 ezgo
Sorry it took so long to reply, got a bunch of parts in for my cart.
Here are the measurements for my 89 Marathon seatback posts. Total Height = 18 1/4 inches. 6 7/8 inches from the bottom is an approx 7 degree bend towards the back of the cart. 16 7/8 inches from the bottom is the centerline of the mounting holes for the seat backs. Mounting holes are 1 1/2 inches off center respectively. These holes are 5/16 diameter. 7/8 inch from the bottom is a front to back mounting hole. 3 7/8 inches from the bottom is another front to back mounting hole. 5 7/8 inches from the bottom is a left to right mounting hole. All mounting holes are 3/8 diameter. Hope this helps. |
06-29-2011, 12:47 PM | #6 |
Gone Wild
Join Date: Apr 2009
Location: Chino Ca
Posts: 209
|
Re: Seat back posts for 89 ezgo
I have a pair of seat posts out of a 94 Marathon you can have if you pay for the ride.
|
06-29-2011, 12:58 PM | #7 |
Gone Wild
Join Date: Apr 2009
Location: Chino Ca
Posts: 209
|
Re: Seat back posts for 89 ezgo
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB factory ezgo seat back | Golf Carts and Parts | |||
94 EZGO seat back post's | Golf Carts and Parts | |||
Looking for ezgo back seat | Golf Carts and Parts | |||
wanted ezgo seat back | Golf Carts and Parts | |||
Club car seat back on Ezgo? | Electric EZGO |