48v on stock dcs motor

brownleaf · 10-25-2007, 07:46 PM

Hello everyone,a newbie here.Have a 97 ezgo dcs with a stock motor.Have installed 4ga wires and a 400 amp alltrac controller.Wanting to go 48v.My question is will my stock motor handle 48v?? Thanks........
Also will change to 48v solenoid..

roady89 · 10-25-2007, 07:48 PM

If your controller is made to handle 48 volts then yes your motor will handle the 48 volts also. You will gain 20-25% in overall power and torque. One of the best upgrades you can do.

Oh and WELCOME to the forum!!

brownleaf · 10-26-2007, 08:18 AM

Thanks Roady for your response!!!!!!!!

Monsterezgokid · 10-31-2007, 01:15 PM

Welcome to the 48V DCS club!

you will have many fun times ripping around with your new found power, and squeeling the tires!

Well actualy you will see a major improvement over your stock speed, and take off "Umph"!.. I have been running my street cart for a year with a stock motor combo with a alltrax DCX 500.. motor still runs fine.. but i want to chekc it in the spring, and polish up the comm and check the brushes.

As a alltrax dealer here in canada, ive gotten many different tips and ways to crank the most out of these controllers, and make them shine!

Thing is you might loose your regen feature when going to 48V.. its just something that has to do with the motor not being able to produce the proper voltage back to the controller when regen is enabled, because the internal fields are designed for a 36V app..

Good luck, and happy Cartin!

10-25-2007, 07:46 PM	#1
brownleaf Not Yet Wild Join Date: Oct 2007 Posts: 29	48v on stock dcs motor Hello everyone,a newbie here.Have a 97 ezgo dcs with a stock motor.Have installed 4ga wires and a 400 amp alltrac controller.Wanting to go 48v.My question is will my stock motor handle 48v?? Thanks........ Also will change to 48v solenoid..
brownleaf Not Yet Wild Join Date: Oct 2007 Posts: 29

10-25-2007, 07:48 PM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,024	Re: 48v on stock dcs motor If your controller is made to handle 48 volts then yes your motor will handle the 48 volts also. You will gain 20-25% in overall power and torque. One of the best upgrades you can do. Oh and WELCOME to the forum!! Last edited by roady89; 10-26-2007 at 08:38 AM.. Reason: mis-spelled a word
roady89 nimda Join Date: Jun 2007 Posts: 13,024

10-26-2007, 08:18 AM	#3
brownleaf Not Yet Wild Join Date: Oct 2007 Posts: 29	Re: 48v on stock dcs motor Thanks Roady for your response!!!!!!!!
brownleaf Not Yet Wild Join Date: Oct 2007 Posts: 29

10-31-2007, 01:15 PM	#4
Monsterezgokid Kid no more!! Join Date: Feb 2007 Location: Bradford, Ontario, Canada Posts: 750	Re: 48v on stock dcs motor Welcome to the 48V DCS club! you will have many fun times ripping around with your new found power, and squeeling the tires! Well actualy you will see a major improvement over your stock speed, and take off "Umph"!.. I have been running my street cart for a year with a stock motor combo with a alltrax DCX 500.. motor still runs fine.. but i want to chekc it in the spring, and polish up the comm and check the brushes. As a alltrax dealer here in canada, ive gotten many different tips and ways to crank the most out of these controllers, and make them shine! Thing is you might loose your regen feature when going to 48V.. its just something that has to do with the motor not being able to produce the proper voltage back to the controller when regen is enabled, because the internal fields are designed for a 36V app.. Good luck, and happy Cartin!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
What motor?	Big Block Talk!
50plus stock!!!	Gas golf carts
motor II	Big Block Talk!
motor	Big Block Talk!
G9? Replacing stock air box with K&N?	Gas Yamaha