08-15-2016, 01:00 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 22
|
KF82 Valve Cam
Took engine apart during rebuild only to find that the metal plate on the valve cam had broken off and was laying in the bottom of the crank case. Looks as if a rivet broke off and then ripped the metal plate off. The gear looks in good condition, any ideas for fix? Any one have a valve cam? Can I tighten what I have and go without the metal plate? I think I have seen another post about the rivets breaking off although I could not locate again. Thanks everyone!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2016, 02:07 PM | #2 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: KF82 Valve Cam
Juts get some strong machine bolts and nyloc nuts and you should be good to go. Just make sure you shorten the bolts enough so that they don't hit anything while spinning.
|
08-15-2016, 04:40 PM | #3 |
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: KF82 Valve Cam
Or if you pay shipping I'll send you one
I have 2 parts motors |
08-15-2016, 07:41 PM | #4 |
Not Yet Wild
Join Date: Jul 2016
Posts: 22
|
Re: KF82 Valve Cam
|
08-17-2016, 07:09 AM | #5 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: KF82 Valve Cam
mine was broke also. I ground the heads off the rivets since they were loose in there without the metal plate then pushed them out. Swaped them for socket head cap screws with nylock nuts. 8-32 if I remember right. ran it for a year or so like that with no metal plate with no issues until I pulled the motor and did the clone swap. see post #9 :
http://www.buggiesgonewild.com/gas-c...cam-gears.html |
08-17-2016, 08:28 AM | #6 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: KF82 Valve Cam
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Checking Valve Clearance - KF82 | Gas Club Car | |||
Kf82 | Gas Club Car | |||
Kf82 rpm | Gas Club Car | |||
briggs vtwin valve oil seal which valve | Big Block Talk! | |||
kf82 valve adjustment | Gas Club Car |