Pargo brake band

keesee · 04-24-2017, 11:04 AM

brake.jpg

Can anyone help me with this band brake? I currently have the cable running through the brake just fine. My problem comes with the cable clamp that is on the cart. After a bit of braking the cable starts to slip through the wire clamp. Is there something that SHUOLD be used for a band brake to stop the cable? I tried doing some research but couldn't find what I thought was a good fix. I tried a cable stop, where you run the cable through a cylinder type part and clamp down with a screw but I can't find the right size. Cable is 1/8" and I tried 1/8" cable stops but can't get the cable through the hole. Its a wire cable and the ends always fray when you cut them.

Any guidence would be appreciated.

Thanks,

04-24-2017, 11:04 AM	#1
keesee Not Yet Wild Join Date: Jul 2015 Posts: 23	Pargo brake band brake.jpg Can anyone help me with this band brake? I currently have the cable running through the brake just fine. My problem comes with the cable clamp that is on the cart. After a bit of braking the cable starts to slip through the wire clamp. Is there something that SHUOLD be used for a band brake to stop the cable? I tried doing some research but couldn't find what I thought was a good fix. I tried a cable stop, where you run the cable through a cylinder type part and clamp down with a screw but I can't find the right size. Cable is 1/8" and I tried 1/8" cable stops but can't get the cable through the hole. Its a wire cable and the ends always fray when you cut them. Any guidence would be appreciated. Thanks,
keesee Not Yet Wild Join Date: Jul 2015 Posts: 23

Similar Threads
Thread	Forum
Brake cable for a motor band brake	Electric EZGO
Pargo No-Go	Electric golf carts
pargo	Gas golf carts
Radio Noise on AM Band	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum