|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-27-2019, 08:51 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Location: Alabama
Posts: 1
|
Robin 295 valve seal issue
Hello, first post so bare with me...ha. I've got a 2007 ezgo txt w/ the Robin 295 which was smoking pretty bad. I checked the crankcase vent and it was clear. So I ordered a set of valve seals just a a cheap try at stopping the smoke. When I removed one of the springs(cylinder air charged) the seal was up on the valve stem (not seated). I swapped all the seals out with new ones but I'm still having an issue getting them to stay seated. I can put it back together and it won't smoke a bit...for about 5 minutes. I pulled the valve cover and now two of the new ones have moved up on the stems.
So what I'm I not doing correctly? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 EZ-GO ST350 valve seal replacement | Gas EZGO | |||
Valve seal replacement | Gas EZGO | |||
valve stem seal | Gas Yamaha | |||
295 robin cam seal apt part# ? | Gas EZGO | |||
briggs vtwin valve oil seal which valve | Big Block Talk! |