12-09-2019, 10:08 PM | #51 | |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: 1991 Club Car Gas
Quote:
I have the governor rods completely disconnected on both my carts (the rod wasn't long enough to give me the speeds I wanted). But I'm the only one who drives my carts 97% of the time, and when someone else drives them, it's someone I trust to not hot rod, or else I'm with them. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-09-2019, 11:01 PM | #52 |
Resident Curmudgeon
Join Date: Oct 2011
Posts: 1,279
|
Re: 1991 Club Car Gas
I won't touch that governor rod with a 10 ft pole. The number of lost days and time trying to get it right after anyone monkeys with it is a nightmare.
It's much easier to just adjust the throttle cable length. NEVER mess with that governor system. |
12-10-2019, 12:18 AM | #53 | |
Gone Wild
Join Date: Dec 2019
Posts: 193
|
Re: 1991 Club Car Gas
Quote:
So I should adjust the cable out to give me more pedal? Sent from my iPhone using Tapatalk |
|
12-10-2019, 12:30 AM | #54 |
Gone Wild
Join Date: Dec 2019
Posts: 193
|
Re: 1991 Club Car Gas
I agree with both of you guys about the governor. Im going to mark where it is now and move it ever so slightly. Probably stop somewhere around 12-14 mph will be good.
Sent from my iPhone using Tapatalk |
12-10-2019, 06:43 AM | #55 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: 1991 Club Car Gas
I’m curious as to what you think is so complicated about it. The rod is fixed at the carb and adjustment involves the loosening of a single screw in the governor arm pivot to make the adjustment. Setting it back to factory default is as simple as loosening the screw, pushing the rod all the way forward towards the carb and also sliding the governor arm all the way forward on the rod and re-tightening the screw.
|
12-10-2019, 10:31 AM | #56 |
Resident Curmudgeon
Join Date: Oct 2011
Posts: 1,279
|
Re: 1991 Club Car Gas
All i know is whenever a customer messed around with one it took an entire day or days to get it right again. It's a bit more involved than on a later model DS. Doesn't help we don't have the service manual for that old a engine anymore.
Before we eventually got it right, it either wouldn't go more than idle, or woult have WOT only, no matter the pedal position, or it'd never slow down going downhill at WOT. or it'd go all 'herky jerky' up and down up and down like it had an RPM limiter on it. |
12-10-2019, 11:08 AM | #57 | |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: 1991 Club Car Gas
Quote:
The 1984-1991 governor setup is so simple...TOO simple almost. I believe that the simplicity of the older governor was it's downfall, as rowdy golfers in the 1980s and 1990s renting gas Club Cars were able to easily disable them on the course. I think that it's likely that frustrated golf course owners with garages full of blown up KF82 motors made it known to Club Car that they needed to make their speed governors harder to tamper with or else they would purchase their gas carts from someone else. |
|
04-27-2020, 10:22 AM | #58 |
Gone Wild
Join Date: Dec 2019
Posts: 193
|
Re: 1991 Club Car Gas
Out with the old....
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
1991 club car | Gas Club Car | |||
2008 electric Club Car or 1991 14hp gas Club car??? | Electric Club Car | |||
$5 1991 Club Car | Gas Club Car | |||
1991 CLUB CAR | Gas Club Car |