|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-21-2021, 03:30 PM | #21 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Second treatment came back the same: 120
Sent from my SM-G988W using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-21-2021, 11:51 PM | #22 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Just spent a few hours reading through this forum about rings and compression etc. And found a post with the compression specs for the G22 - YDRA and the compression should be anywhere from 90s to 125 so I'd say I'm good.
I know at this point Im just talking out loud but maybe it will be useful to someone else down the line. Sent from my SM-G988W using Tapatalk |
03-22-2021, 10:16 PM | #23 |
Getting Wild
Join Date: Nov 2020
Location: Edgewater. FL
Posts: 113
|
Re: 2013 G29 Drive Build
I bought a used clutch set (Primary and secondary) as a replacement for my G2 cart but was informed they were not a match and even though the primary would fit, it was too heavy for the motor in my G2 cart. Interested? PM if you are. They were pulled from a cart in Florida which was converted/upgraded to a Plowman's performance clutch set.
|
04-01-2021, 11:11 PM | #24 | |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Quote:
Sent from my SM-G988W using Tapatalk |
|
04-01-2021, 11:15 PM | #25 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Started stripping it down. I was a little worried about what I was getting with all the mud and grass caked on it. Turns out, it cleans up nicely. I will hopefully get the floor pan, tank, and engine pulled tomorrow to paint the frame. Lift kit as soon as the paint dries.
Sent from my SM-G988W using Tapatalk |
04-02-2021, 09:07 PM | #26 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Stripped down the cart most of the way down to the frame today. Cleaned up everything, painted the frame and got it mostly back together.
Sent from my SM-G988W using Tapatalk |
04-05-2021, 12:30 AM | #27 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Lift is in, wheels are on and Havoc body kit is installed. As well as the new dash, bumper, rockers and OEM floor mat.
Sent from my SM-G988W using Tapatalk |
04-05-2021, 06:47 AM | #28 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: 2013 G29 Drive Build
Looking good buddy!
|
04-05-2021, 05:25 PM | #29 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
Got it polished up today. Warning for anyone considering a Havoc body kit, it seems to scratch the clear coat really easily. I had to use swirl remover and polish the hell out of it and then I put two coats of ceramic coating on to try and protect it a bit. I'm thinking of having 3M clear or something similar put on it but people have also had problems with stickers peeling the clear coat when they took them off of a havoc body so I'm also worried about that if the 3M needed to be replaced (or even just during the install process). The other option is roll with it for now and then have it wrapped in gloss black if it gets too scuffed up.
Sent from my SM-G988W using Tapatalk |
04-05-2021, 05:32 PM | #30 |
Getting Wild
Join Date: Jul 2013
Posts: 116
|
Re: 2013 G29 Drive Build
I wasn't happy with the way I wired the switches on my last cart as there were so many wires running to the dash where the switches were. I found this setup from Auxbeam on Amazon and it has a fuse panel and one cable that runs forward to the button pad. Then when you push a button on the pad, it turns on the corresponding circuit on the fuse panel. It also has an all off and all on button in the center. Furthermore, the fuse panel has a remote signal wire that turns on the fuse panel when it receives power and turns the entire panel off when that wire loses power. I wired it to the ignition so that when the key is off, so are the accessories. Also comes with a pretty good selection of stickers to label the buttons appropriately.
Sent from my SM-G988W using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
2013 CC Precedent Build FS | Golf Carts and Parts | |||
2013 Yamaha Drive Build Project | Members Rides | |||
2013 YDR G29 Gas Build | Members Rides | |||
2013 New Build | Gas Yamaha | |||
2013 Precedent Build | Electric Club Car |