|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-17-2021, 01:07 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
|
16 pin connector replacement
I had an issue previously and replaced one of the molex pins in the 16 pin connector to the controller. Everything has been great until today. Went take off and nothing happened. I immediately suspected that connector and sure enough it was. When I look at the pins it looks great. When I push the connector towards when the clip that holds it to the controller it doesn't engage the solenoid but then forced the other way it works. I put a zip tie to hold it and it works but would rather replace replace it with a new one complete with the wiring already there, All I see is the connector and pins where you make your own, Can anyone tell me the part number and where to buy complete with the wiring.
Thank you! 2008.5 Club Car Precedent |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-17-2021, 05:56 PM | #2 |
Gone Wild
Join Date: Jul 2017
Location: Cape Coral FL
Posts: 243
|
Re: 16 pin connector replacement
The only way I could see doing that is picking up a new wiring harness. They can still be had at decent price.
|
02-17-2021, 06:15 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
|
Re: 16 pin connector replacement
I am not finding this any way that I look. The harnesses that I am seeing are for lights and don't include the 16 pin connector. If you know otherwise please let me know. Thanks!
|
02-17-2021, 07:38 PM | #4 |
Getting Wild
Join Date: Oct 2016
Posts: 78
|
Re: 16 pin connector replacement
Digi-Key has them part number is WM3709-ND also David at Revolution has a new wiring harness that will fit.
|
02-17-2021, 08:32 PM | #5 |
Not Yet Wild
Join Date: Jun 2020
Location: Flagler Beach Florida
Posts: 16
|
Re: 16 pin connector replacement
I'm hoping to find the connector with the wiring. The Digi-key number is a 20 pin without the wiring , mine is the 16 pin. I will try Revolution. Thank you for the help!
|
02-18-2021, 10:48 AM | #6 |
Getting Wild
Join Date: Oct 2016
Posts: 78
|
Re: 16 pin connector replacement
Sorry I copy the wrong link. David has a new wiring harness that works fine. e ships out fast
|
|
|
Similar Threads | ||||
Thread | Forum | |||
9 pin connector | Electric EZGO | |||
RXV 9 Pin Connector | Electric EZGO | |||
16 pin connector | Electric Club Car | |||
Where is the six pin connector | Electric EZGO | |||
Controller 6 pin connector replacement | Electric EZGO |