|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-31-2022, 10:05 PM | #1 |
Not Yet Wild
Join Date: Mar 2022
Posts: 6
|
G2 no reverse, grinding
Hello, my Yamaha G2 gas suddenly has no reverse. Has about 6 hours on a new shifter cable, now when put into reverse it will just rev and a grinding sound coming from what seems to be the rear end. Forward works fine and the lever appears to be getting a full throw in both directions. Just looking for what my next step should be for diagnosis and if it needs a new rear end, where would my best bet be to find one? Could it be converted with a rear end from something else?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-31-2022, 11:01 PM | #2 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: G2 no reverse, grinding
I don't know this machine but if the rear end shift is cable operated from a lever my guess would be cable adjustment is likely needed.
|
04-02-2022, 08:49 AM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G2 no reverse, grinding
Did you change both cables ?
|
04-02-2022, 09:58 AM | #4 |
Not Yet Wild
Join Date: Mar 2022
Posts: 6
|
Re: G2 no reverse, grinding
Yes the whole assembly was changed. Both cables and the lever attaching to rear end. Is there an adjustment that can be made on the rear end of cables or just at the shifter end? Worked fine at first, then a handful of takeoffs it had trouble catching reverse, and now will not grab at all.
|
04-02-2022, 02:11 PM | #5 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: G2 no reverse, grinding
Perhaps you have the forward cable to tight not allowing full engagement in revese??
|
04-02-2022, 03:11 PM | #6 |
Not Yet Wild
Join Date: Mar 2022
Posts: 6
|
Re: G2 no reverse, grinding
Thanks for the replies. My throttle cable broke this morning so while I had everything tore back apart replacing that I played around adjusting the shift cables and eventually got it. Maybe some kind of break in stretching on the cable? Forward and reverse both fully tightened and shifts smooth and engages every time now.
|
04-02-2022, 03:17 PM | #7 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: G2 no reverse, grinding
Kool Beans now go ride it
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Can't change from forward to reverse without grinding | Clone Engine Swaps | |||
Grinding and slams into reverse | Gas EZGO | |||
Grinding in Reverse? | Gas Club Car | |||
Reverse grinding noises. | Electric Yamaha | |||
1991 Gas G2... Grinding when put in reverse | Gas Yamaha |