Rear seat cover material.

cdestuck · 06-11-2022, 08:52 PM

Friend has a 2002 TXT with a flip down rear seat. Unknown maker of this aftermarket seat as there’s probably a million of them. But nothing fancy. Well the wood base to it has seen better days and I’m going to replace. I know with as stiff as it is, there’s no getting off the vinyl cover without it tearing. Is there a place I can find just the covers, like you can buy to recover the front seat. I see total replacement seats but just looking for the material. Tks.

Sir Nuke · 06-12-2022, 08:02 AM

most likely not.....HOWEVER, you could most likely have them made at a good upholstery shop. I looked into that once....but it was about twice as expensive as buying a set off the shelf.

cartdoc1969 · 06-12-2022, 10:22 AM

Buy a piece of marine vinyl at a fabric store and cut your own cover. A hardware store will have the plywood, staples and fasteners to make a new base. Total cost should be under $40.

06-11-2022, 08:52 PM	#1
cdestuck Not Yet Wild Join Date: Jun 2015 Posts: 35	Rear seat cover material. Friend has a 2002 TXT with a flip down rear seat. Unknown maker of this aftermarket seat as there’s probably a million of them. But nothing fancy. Well the wood base to it has seen better days and I’m going to replace. I know with as stiff as it is, there’s no getting off the vinyl cover without it tearing. Is there a place I can find just the covers, like you can buy to recover the front seat. I see total replacement seats but just looking for the material. Tks.
cdestuck Not Yet Wild Join Date: Jun 2015 Posts: 35

06-12-2022, 08:02 AM	#2
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 17,975	Re: Rear seat cover material. most likely not.....HOWEVER, you could most likely have them made at a good upholstery shop. I looked into that once....but it was about twice as expensive as buying a set off the shelf.

06-12-2022, 10:22 AM	#3
cartdoc1969 Gone Wild Join Date: Sep 2021 Location: Pa Posts: 279	Re: Rear seat cover material. Buy a piece of marine vinyl at a fabric store and cut your own cover. A hardware store will have the plywood, staples and fasteners to make a new base. Total cost should be under $40.

Similar Threads
Thread	Forum
Rear flip seat base material options	Electric EZGO
Flooring material for rear seat?	Electric EZGO
Cutting Door In Rear Flip Seat Bed Material	Electric EZGO
Rear Seat Pad and Cover ideas?	Design Center
Workhorse cowl and seat cover material	Members Rides

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum