EZGO WORKHORSE ROBIN 350 fouls plugs with air box connected

[slonomo]

Listen to these guys, they know.

[Cartmaster]

I guess age and experience counts for something Slo!

[U2SLO4ME]

Gentlemen,

Thank you very much for all of your help! I will proceed with the teardown as soon as I have time. Unfortunately that will not be in the near future. When im able to I will post the autopsy results. Any recommendations as to where I should purchase the parts when the time arrives?

Thanks again
Chuck

[trig123]

Originally Posted by U2SLO4ME

Gentlemen,

Thank you very much for all of your help! I will proceed with the teardown as soon as I have time. Unfortunately that will not be in the near future. When im able to I will post the autopsy results. Any recommendations as to where I should purchase the parts when the time arrives?

Thanks again
Chuck

This seller is one of this sites sponsors.
https://jasonsgolfcarts.com/product/...-go-350cc-std/
Just remember you need two when ordering the rings. I think they have the gaskets and most everything you need. Check them out first.

[U2SLO4ME]

Thank you Trig. Will do.

[U2SLO4ME]

Hello Again all,

Thought I would post an interesting update. Since I had already ordered two smaller main jets (85 and 80) for this cart before I posted my original post, I thought in the interest of experimentation I would throw the 85 in it and see what happens. Results are follows. Plugs are still on the rich side but much better than before as they would foul to point where the cart would drop a cylinder. with the stock 90 installed. Ironically I notice no power loss (seem to have plenty of torque and top speed). It does after fire thought the exhaust every once in a while. Still uses no oil and will be getting a rebuild as soon as the snow fly's!

Thanks again Everyone!

Chuck